Reproduction of the wide wall cylinder with 50 cc displacement and narrow exhaust for your Pony moped / moped with Sachs 503 AB, AC or ADV engine.
The ports, timing and appearance are almost identical to the original. The replacement cylinder also has a bore for the deco valve.
In addition to the piston, piston ring, clips and bolts, the scope of delivery also includes the required gaskets for the base, intake and exhaust. In addition, an O-ring and a reinforced graphite gasket for the cylinder cover are included, which can be used as required. It is still possible to use the original cylinder head.
Cylinder material: Cast aluminum
Piston material: Cast aluminum
Bore: 38 mm
Capacity: 49.90 cm³
Ø Cylinder neck: 52 / 50.5 mm
Inside outlet: 19.5 x 11 mm
Ø Outside outlet: 23 mm
Outlet thread: M6 x 1
Hole spacing outlet: 50.5 mm
Inlet hole spacing: 36 mm
Inlet thread: M6 x 1
Inlet window inside: 18 x 7 mm
Hole pattern: 56 x 56 mm
Ø Stud bolt hole: 6.9 mm
Piston bolt: 12 mm
Decompressor hole: yes, MF12x1.25 mm
Note: The inlet of the cylinder has a double hole pattern, so that sockets for both the AB / AC and the ADV engine can be fitted.
The narrow outlet is designed for AB / AC exhausts. A flame tube from the AB / AC engine must therefore be fitted to the ADV engine.
Matching attachments for the cylinder set can be found under accessories.
Original Pony spare part number: A2868
Branded product from the manufacturer AKOA.
Details
| Manufacturer | AKOA |
| Material | Aluminum |
| Surface | varnished, nikasil-coated |
| Displacement | 50 ccm |
| Crankshaft stroke | 44 mm |
| Ø cylinder neck | 52 mm, 50.5 mm |
| Nominal diameter | 38 mm |
| Ø Outlet outside | 23 mm |
| Inlet window | 18x7 mm |
| Ø piston pin (B) | 12 mm |
| Ø outlet inside | 19.5 mm, 11 mm |
| Thread inlet | M6x1 (standard thread) |
| Area of application | Standard |
| Hole spacing outlet | 50.5 mm |
| Hole spacing inlet | 36 mm |
| Outlet type | slanted |
| Thread outlet | M6x1 (standard thread) |
| Decompressor | MF12x1.25 |
| Pony OEM number | A2868 |
Suitable for the following models
| Sachs | 503 - AB, AC, ADV |
Accessories & related products
swiing® revival gasket set | Sachs 503 AB, AC wide wall
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Copper · Material: Rubber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 21 pcs · Ø outlet inside: 24 mm · Hole spacing outlet: 38.5 mm · Hole pattern [mm]: 56 x 56
CHF 44.90
swiing® revival gasket set | Sachs 503 ADV wide wall Cat.
Manufacturer: swiing® revival parts · Material: Copper · Material: Fiber · Material: Rubber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 15 pcs · Ø outlet inside: 23.3 mm · Hole spacing inlet: 38 mm · Hole pattern [mm]: 56 x 56 · Decompressor: No
CHF 44.90
AKOA intake manifold 15 mm SRE | Sachs 503 AB, ADV (A5669, A2180)
Manufacturer: AKOA · Material: Aluminum · Mounting type: Screws · Ø inside: 15 mm · Ø External connection: 20 mm · Hole spacing inlet: 36 mm · Alternative version of the Pony OEM number: A2180 · Alternative version of the Pony OEM number: A5669
CHF 49.90
Not in stock
AKOA intake manifold 20 mm PHBG / CP | Sachs 503 AB, ADV (A5669, A2180)
Manufacturer: AKOA · Material: Aluminum · Mounting type: Screws · Ø inside: 20 mm · Ø External connection: 24 mm · Hole spacing inlet: 36 mm · Alternative version of the Pony OEM number: A2180 · Alternative version of the Pony OEM number: A5669
CHF 49.90
AKOA wide wall 45 mm cylinder kit | Sachs 503 AB, AC, ADV
Manufacturer: AKOA · Material: Aluminum · Surface: nikasil-coated · Surface: varnished · Crankshaft stroke: 44 mm · Displacement: 70 ccm · Ø cylinder neck: 50.5 mm · Ø cylinder neck: 52 mm · Nominal diameter: 45 mm · Ø Inlet inside: 23.5 mm · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Area of application: Tuning · Ø outlet inside: 29 mm · Hole spacing outlet: 50.5 mm · Outlet type: slanted · Hole spacing inlet: 36 mm · Thread outlet: M6x1 (standard thread) · Decompressor: MF12x1.25 · Alternative version of the Pony OEM number: A2868
CHF 299.90
AKOA wide wall 38 mm cylinder kit Sport | Sachs 503 AB, AC, ADV (A2868)
Manufacturer: AKOA · Material: Aluminum · Surface: nikasil-coated · Surface: varnished · Crankshaft stroke: 44 mm · Displacement: 50 ccm · Ø cylinder neck: 50.5 mm · Ø cylinder neck: 52 mm · Nominal diameter: 38 mm · Ø Inlet inside: 23.5 mm · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Area of application: Performance · Ø outlet inside: 29 mm · Hole spacing outlet: 50.5 mm · Outlet type: slanted · Hole spacing inlet: 36 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 56 x 56 · Decompressor: MF12x1.25 · Alternative version of the Pony OEM number: A2868
CHF 299.90
Not in stock
AKOA decompressor M12x1.25 wide wall | Sachs 503 AB, AC, ADV (A2942)
Manufacturer: AKOA · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1.25 (fine pitch thread) · Total length: 66 mm · Thread length: 8 mm · Area of application: Standard · Width across flats SW: 15 mm · Pony OEM number: A2942
CHF 79.90
swiing® ingenious gasket outlet Ø 23 mm graphite | Sachs 503 AB, AC
Place of use: Outlet · Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Material: Steel · Color: gray · Ø inside: 23 mm · Thickness: 2 mm · Number of fixing points: 2 pcs · Hole spacing: 48.5 - 51.5 mm
CHF 8.90
Moped fans like you also bought:
Oil seal NBR 17/33/7 B DUO crankshaft | Sachs 503 AB, ADV
Temperature resistance (min.): -30 - 100 °C · Simmering type: B DUO - With sheet metal outer casing / two sealing lips. · Place of use: Crankshaft · Manufacturer: Sachs · Material: NBR · Width: 7 mm · Ø outside: 33 mm · Ø inside: 17 mm
CHF 8.90
NSK 6201 ball bearing 12/32/10
Bearing type: Shoulder bearing · Stock number: 6201 · Ø inside: 12 mm · Inner ring width: 10 mm · Ø outside: 32 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CM (special/noise-reduced) · Bearing cage: "-" Sheet steel cage ball-guided · Groove ring: No · Material: Steel · Surface: blank · Width: 10 mm · Area of application: Standard
CHF 8.50
Oil seal NBR 14.96x31.5x3.5 Pinion shaft | Sachs 502, 50/2, 503 (A1134)
Temperature resistance (min.): -30 - 100 °C · Place of use: Pinion shaft · Manufacturer: Sachs · Material: NBR · Surface: coated · Width: 3.5 mm · Ø outside: 31.5 mm · Ø inside: 14.96 mm · Area of application: Standard · Pony OEM number: A1134 · Sachs OEM number: 0230 011 100 · Sachs OEM number: 0230 011 200
CHF 7.50
Flame tube 22 mm | Sachs 503 AB (with guide bush)
Manufacturer: Made in Portugal · Color: Chrome · Material: Steel · Surface: chrome-plated · Ø outside: 22 mm · Ø outside: 28 mm · Ø inside: 20 mm · Ø inside: 26 mm · Total length: 440 mm · Hole spacing outlet: 50 mm · Number of fixing points: 2 pcs · Flame tube attachment: Stud bolts & nuts
CHF 29.90
Jasil crankshaft | Sachs 503 AC / ADV (A3337 / A2904)
Dimension needle bearing: 12 / 15 x 12.8 mm (axe 12) · Manufacturer: Jasil · Material: Steel · Cheek type: standard · Crankshaft stroke: 44 mm · Thread type: MF10x1 (fine pitch thread) · Connecting rod length center-center: 86 mm · Total length of crankpin on clutch side: 97 mm · Total length crankpin ignition side: 62 mm · Thread length: 7 mm · Thread length: 11 mm · Ø crank webs: 83 mm · Ø piston pin (B): 12 mm · Area of application: Standard · Ø Connecting rod eye: 15 mm · Weight: 964 g · Ø Bearing seat (clutch side): 12 mm · Ø Bearing seat (ignition side): 15 mm · Wide crank webs: 34.2 mm · Length 1st paragraph: 9.4 mm · Length 2nd paragraph: 19.4 mm · Length 3rd paragraph: 74 mm · Ø 1st step (on the coupling side): 17 mm · Ø 2nd shoulder (on the clutch side): 12 mm · Ø 3rd step (on the clutch side): 11.6 mm · Length of shoulder (ignition side): 32 mm · Number of gears: 2 pcs
CHF 199.90
Oil seal NBR 15/30/7 B DUO | Sachs 50/2 / 503 (A1830)
Temperature resistance (min.): -30 - 100 °C · Simmering type: B DUO - With sheet metal outer casing / two sealing lips. · Manufacturer: Sachs · Material: NBR · Width: 7 mm · Ø outside: 30 mm · Ø inside: 15 mm · Pony OEM number: A1830 · Sachs OEM number: 0250 090 000
CHF 5.40
NTN 6202 C3 ball bearing 15/35/11
Bearing type: Deep groove ball bearing · Bearing cage: "-" Sheet steel cage ball-guided · Stock number: 6202 · Inner ring width: 11 mm · Manufacturer: NTN · Bearing clearance: C3 · Width: 11 mm · Ø outside: 35 mm · Ø inside: 15 mm · Puch OEM number: 900.4.6202
CHF 5.90
Collection only possible with online purchase and appointment.
