38 mm tuning cylinder with 50 cc displacement and narrow exhaust for your Pony moped / moped with Sachs 503 AB, AC or ADV engine.
The wide-bore racing kit has been heavily reworked compared to the original cylinder. The overflow ducts, the intake and exhaust have been enlarged. There is hardly any visible difference from the outside. In terms of performance, the racing cylinder is designed for the upper engine speeds. Due to the long exhaust timing, a high back pressure is required to exploit the power.
In addition to the piston, piston ring, clips and bolts, the scope of delivery also includes the required gaskets for the base, intake and exhaust. In addition, an O-ring and a reinforced graphite gasket for the cylinder cover are included, which can be used as required. It is still possible to use the original cylinder head.
Cylinder material: Cast aluminum
Piston material: Cast aluminum
Bore: 38 mm
Capacity: 49.90 cm³
Ø Cylinder neck: 52 / 50.5 mm
Exhaust inside: 19.5 x 11 mm
Ø Exhaust inside: 29 mm
Exhaust thread: M6 x 1
Hole spacing exhaust: 50.5 mm
Hole spacing inlet: 36 mm
Inlet thread: M6 x 1
Ø inlet inside: 23.5 mm
Hole pattern: 56 x 56 mm
Ø stud bolt hole: 6.9 mm
Piston pin: 12 mm
Decompressor hole: yes, MF12x1.25 mm
Note: The inlet of the cylinder has a double hole pattern, so that sockets for both the AB / AC and the ADV engine can be fitted.
The narrow outlet is designed for AB / AC exhausts. A flame tube from the AB / AC engine must therefore also be fitted to the ADV engine.
Matching attachments for the cylinder set can be found in the accessories section.
Alternative to the original Pony spare part number: A2868
Branded product from the manufacturer AKOA.
Details
Nominal diameter | 38 mm |
Manufacturer | AKOA |
Material | Aluminum |
Surface | varnished, nikasil-coated |
Displacement | 50 ccm |
Area of application | Performance |
Crankshaft stroke | 44 mm |
Ø cylinder neck | 52 mm, 50.5 mm |
Ø outlet inside | 29 mm |
Ø Inlet inside | 23.5 mm |
Thread inlet | M6x1 (standard thread) |
Hole spacing inlet | 36 mm |
Ø piston pin (B) | 12 mm |
Outlet type | slanted |
Hole spacing outlet | 50.5 mm |
Thread outlet | M6x1 (standard thread) |
Hole pattern [mm] | 56 x 56 |
Decompressor | MF12x1.25 |
Alternative version of the Pony Spare part no. | A2868 |
Suitable for the following models
Sachs | 503 - AB, AC, ADV |
Accessories & related products
swiing® revival gasket set | Sachs 503 AB, AC wide wall
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Aluminum · Material: Copper · Material: Rubber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 24 mm · Number of components: 21 pcs · Hole pattern [mm]: 56 x 56 · Hole spacing outlet: 38.5 mm
CHF 44.90
swiing® revival gasket set | Sachs 503 ADV wide wall Cat.
Manufacturer: swiing® revival parts · Material: Copper · Material: Fiber · Material: Rubber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Ø outlet inside: 23.3 mm · Hole spacing inlet: 38 mm · Hole pattern [mm]: 56 x 56 · Decompressor: No · Number of components: 15 pcs
CHF 44.90
AKOA wide wall 38 mm cylinder kit original | Sachs 503 AB, AC, ADV (A2868)
Nominal diameter: 38 mm · Manufacturer: AKOA · Material: Aluminum · Surface: nikasil-coated · Surface: varnished · Displacement: 50 ccm · Crankshaft stroke: 44 mm · Hole spacing inlet: 36 mm · Ø cylinder neck: 50.5 mm · Ø cylinder neck: 52 mm · Ø outlet inside: 11 mm · Ø outlet inside: 19.5 mm · Ø Outlet outside: 23 mm · Area of application: Standard · Inlet window: 18x7 mm · Hole spacing outlet: 50.5 mm · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Decompressor: MF12x1.25 · Pony spare part no.: A2868
CHF 299.90
AKOA intake manifold 15 mm SRE | Sachs 503 AB, ADV (A5669, A2180)
Manufacturer: AKOA · Material: Aluminum · Ø inside: 15 mm · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 36 mm · Alternative version of the Pony Spare part no.: A2180 · Alternative version of the Pony Spare part no.: A5669
CHF 49.90
AKOA intake manifold 20 mm PHBG / CP | Sachs 503 AB, ADV (A5669, A2180)
Ø inside: 20 mm · Manufacturer: AKOA · Material: Aluminum · Ø External connection: 24 mm · Hole spacing inlet: 36 mm · Mounting type: Screws · Alternative version of the Pony Spare part no.: A2180 · Alternative version of the Pony Spare part no.: A5669
CHF 49.90
AKOA wide wall 45 mm cylinder kit | Sachs 503 AB, AC, ADV
Manufacturer: AKOA · Area of application: Tuning · Material: Aluminum · Surface: nikasil-coated · Surface: varnished · Crankshaft stroke: 44 mm · Displacement: 70 ccm · Ø cylinder neck: 50.5 mm · Ø cylinder neck: 52 mm · Nominal diameter: 45 mm · Ø Inlet inside: 23.5 mm · Ø outlet inside: 29 mm · Hole spacing inlet: 36 mm · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 56 x 56 · Decompressor: MF12x1.25 · Hole spacing outlet: 50.5 mm · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Alternative version of the Pony Spare part no.: A2868
CHF 299.90
AKOA decompressor M12x1.25 wide wall | Sachs 503 AB, AC, ADV (A2942)
Manufacturer: AKOA · Area of application: Standard · Material: Steel · Surface: blue galvanized · Total length: 66 mm · Thread length: 8 mm · Width across flats SW: 15 mm · Thread type: MF12x1.25 (fine pitch thread) · Pony spare part no.: A2942
CHF 79.90
swiing® ingenious gasket outlet Ø 23 mm graphite | Sachs 503 AB, AC
Ø inside: 23 mm · Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Material: Steel · Color: gray · Place of use: Outlet · Thickness: 2 mm · Number of fixing points: 2 pcs · Hole spacing: 48.5 - 51.5 mm
CHF 8.90
Moped fans like you also bought:
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Number of components: 1 pcs · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Area of application: (Dis)assembly tool · Width across flats Screw: 19 mm · Total length: 55 mm · Total length: 75 mm · Strength class: 8.8
CHF 9.90
swiing nozzle set M3.5 (54 - 64) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5 · Nozzle size: 54 · Nozzle size: 56 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64
CHF 15.90
Flame tube 22 mm | Sachs 503 AB (with guide bush)
Ø inside: 20 mm · Ø inside: 26 mm · Manufacturer: Made in Portugal · Color: Chrome · Material: Steel · Surface: chrome-plated · Total length: 440 mm · Ø outside: 22 mm · Ø outside: 28 mm · Number of fixing points: 2 pcs · Hole spacing outlet: 50 mm · Flame tube attachment: Stud bolts & nuts
CHF 29.90
Jasil crankshaft | Sachs 503 AC / ADV (A3337 / A2904)
Manufacturer: Jasil · Area of application: Standard · Material: Steel · Cheek type: standard · Crankshaft stroke: 44 mm · Connecting rod length center-center: 86 mm · Thread length: 7 mm · Thread length: 11 mm · Total length of crankpin on clutch side: 97 mm · Weight: 964 g · Total length crankpin ignition side: 62 mm · Ø crank webs: 83 mm · Ø piston pin (B): 12 mm · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 12 mm · Thread type: MF10x1 (fine pitch thread) · Ø Bearing seat (ignition side): 15 mm · Dimension needle bearing: 12 / 15 x 12.8 mm (axe 12) · Wide crank webs: 34.2 mm · Length 1st paragraph: 9.4 mm · Length 2nd paragraph: 19.4 mm · Length 3rd paragraph: 74 mm · Ø 1st step (on the coupling side): 17 mm · Ø 2nd shoulder (on the clutch side): 12 mm · Ø 3rd step (on the clutch side): 11.6 mm · Length of shoulder (ignition side): 32 mm · Number of gears: 2 pcs
CHF 199.90
AKOA intake manifold 15 mm SRE | Sachs 503 AB, ADV (A5669, A2180)
Manufacturer: AKOA · Material: Aluminum · Ø inside: 15 mm · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 36 mm · Alternative version of the Pony Spare part no.: A2180 · Alternative version of the Pony Spare part no.: A5669
CHF 49.90
AKOA decompressor M12x1.25 wide wall | Sachs 503 AB, AC, ADV (A2942)
Manufacturer: AKOA · Area of application: Standard · Material: Steel · Surface: blue galvanized · Total length: 66 mm · Thread length: 8 mm · Width across flats SW: 15 mm · Thread type: MF12x1.25 (fine pitch thread) · Pony spare part no.: A2942
CHF 79.90