Three-piece set of gaskets for your Sachs moped / moped with 504 / 505 engine and Athena racing kit.
The gasket set consisting of cylinder base gasket and intake and exhaust gasket is suitable for the 48 mm racing kit from Athena.
The matching diaphragm gaskets, the tuning kit and other add-on parts for this cylinder kit can be found in the accessories section.
Quality product from the Italian manufacturer Athena.
| Manufacturer | Athena |
| Number of components | 3 pcs |
| Ø cylinder | 48 mm |
| Area of application | Tuning |
| Sachs | 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT), 2A (HG) 508 - 1 A 535 |
Ratings
Accessories & related products
Athena 48 mm cylinder kit without mounting parts | Sachs (504), 505, 508
Manufacturer: Athena · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Nominal diameter: 48 mm · Crankshaft stroke: 44 mm · Ø piston pin (B): 12 mm · Ø cylinder neck: 51.6 mm · Outlet type: clamped · Area of application: Tuning · Number of fixing points: 4 pcs · Decompressor: M10x1.5
CHF 279.90
Athena 48 mm cylinder kit incl. diaphragm | Sachs (504), 505, 508
Manufacturer: Athena · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Nominal diameter: 48 mm · Crankshaft stroke: 44 mm · Ø piston pin (B): 12 mm · Ø cylinder neck: 51.8 mm · Ø Outlet outside: 26 mm · Ø Inlet inside: 14.7 mm · Ø Inlet inside: 17.8 mm · Hole spacing inlet: 32.5 mm · Inlet window: 31.9 x 36.2 · Thread inlet: M5x0.8 (standard thread) · Ø outlet inside: 19.4 mm · Hole spacing outlet: 50 mm · Outlet type: clamped · Outlet type: straight · Thread outlet: M8x1.25 (standard thread) · Area of application: Tuning · Number of fixing points: 4 pcs · Hole pattern [mm]: 56/60 x 56 · Decompressor: M10x1.5
CHF 299.90
Athena piston 48 mm #B | Sachs 504 / 505
Manufacturer: Athena · Nominal diameter: 48 mm · Ø outside piston (A): 47.96 mm · Ø piston pin (B): 12 mm · Compression height (C): 30.12 mm · Curvature (D): 1.94 mm · Total piston height (E): 59 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Tolerance group: B · Piston weight: 123 g
CHF 68.90
Athena piston 48 mm #A | Sachs 504 / 505
Manufacturer: Athena · Nominal diameter: 48 mm · Ø outside piston (A): 47.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 30.2 mm · Curvature (D): 1.94 mm · Total piston height (E): 59.05 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Tolerance group: A · Piston weight: 123 g
CHF 68.90
Dirko Dichtmasse rot (Silikon) Hochtemperatur 70 ml dauerelastisc
Manufacturer: Elring · Contents [ml]: 70 ml · Color: red · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Temperature resistance (min.): -60 - 300 °C · Gap dimension (max.): 2 mm
CHF 22.90
CHF 327.14/l
Moped fans also bought
NTN 6202 Ball bearing 15/35/11
Bearing type: Deep groove ball bearing · Bearing cage: "-" Sheet steel cage ball-guided · Stock number: 6202 · Inner ring width: 11 mm · Manufacturer: NTN · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Material: Steel · Surface: blank · Width: 11 mm · Ø outside: 35 mm · Ø inside: 15 mm · Ball bearing closed: No
CHF 5.50
CHF 6.90
Athena piston 48 mm #A | Sachs 504 / 505
Manufacturer: Athena · Nominal diameter: 48 mm · Ø outside piston (A): 47.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 30.2 mm · Curvature (D): 1.94 mm · Total piston height (E): 59.05 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Tolerance group: A · Piston weight: 123 g
CHF 68.90
Collection only possible with online purchase and appointment.
