Not so nice 
Wheel bearing cone with M12 x 1 mm thread for front wheel and rear wheel on your moped, moped or small motorcycle.
Wrench width: 16.9 mm
Height: 14.5 mm
Ø outer: 20 mm
The track is suitable for 3/16" (Ø 4.78 mm), 7/32" (Ø 5.56 mm), 1/4" (Ø 6.35 mm) balls, but the pitch must be observed.
Corresponding bearing balls, wheel axles, wheel nuts and other attachments can be found in the accessories section.
Price per piece
Mäsig-läsig! – We strive to offer you the widest range of moped spare parts. However, this product is of rather poor quality and is not recommended by us. Should you nevertheless choose this item, we understand, but cannot offer you any guarantee or exchange.
These cones have a soft surface and are therefore not suitable for professional use.
High-quality alternatives can be found in the accessories section.
| Material | Steel |
| Surface | galvanized (blue) |
| Thread type | MF12x1 (fine pitch thread) |
| Height | 14.5 mm |
| Ø outside | 20 mm |
| Width across flats | 16.9 mm |
| Ø ball [inch] / [mm] | 3/16" (4.78 mm), 7/32" (5.56 mm), 1/4" (6.35 mm) |
| Puch |
| Sachs |
Ratings
Accessories & related products
Nut M12x1 x 5 SW19 Wheel nut galvanized
Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.5D · Thread type: MF12x1 (fine pitch thread) · Height: 5.8 mm · Drive: External hexagon · Strength class: 8 · Width across flats: 19 mm · Pony OEM number: A4249 · Sachs OEM no.: 0242 124 000
CHF 1.80
swiing® revival wheel axle M12x1 x 165 ball bearing galvanized version
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 11.95 mm · Total length: 165 mm · Thread length: 40 mm · Thread length: 50 mm · Shank length: 75 mm · Thread type: MF12x1 (fine pitch thread)
CHF 12.90
Explore categories from Hub & axle
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm
CHF 9.90
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Ø inside: 41 mm · Ø outside: 45 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
CHF 2.80
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Ø Stranded wire: 1.2 mm · Nipple shape: Barrel (transverse) · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Brass · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2000 mm · Nipple length: 5.5 mm
CHF 3.40
Nut M12x1 x 5 SW19 Wheel nut galvanized
Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.5D · Thread type: MF12x1 (fine pitch thread) · Height: 5.8 mm · Drive: External hexagon · Strength class: 8 · Width across flats: 19 mm · Pony OEM number: A4249 · Sachs OEM no.: 0242 124 000
CHF 1.80
Collection only possible with online purchase and appointment.
