Gas cable pipe bend incl. cable adjusting screw suitable for various mopeds, mopeds and small motorcycles with Bing carburettors.
The gas cable guide pipe has an M7 x 0.75 mm mounting thread.
Other carburettor bends and throttle cables can be found in the accessories section.
Original BING spare part manufactured in Germany in original equipment quality.
NOS – New from old stock.
Details
| Manufacturer | BING |
| Surface | nickel-plated |
| Carburetor type | 85 |
| Material | Brass |
| Ø outside | 7 mm |
| Internal thread | MF6x0.75 (fine pitch thread) |
| Height | 25 mm |
| Angle | 90 ° |
| Total length | 38 mm, 45 mm |
| Width across flats nut | 9 mm |
| Thread type | MF7x0.75 (fine pitch thread) |
| Pony OEM number | A2066 |
| Sachs OEM no. | 0261 132 000 |
Suitable for the following models
| Puch | E50 ZA50 (Fahrtwindgekühlt) |
| Sachs | 503 - ADV 535 |
Accessories & related products
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Cable length: 2200 mm · Nipple length: 5 mm · Area of application: Standard
CHF 2.80
Dell'Orto 90° carburetor pipe bend set M6x0.75
Surface: nickel-plated · Manufacturer: Dell'Orto · Material: Brass · Ø outside: 6 mm · Total length: 43 mm · Total length: 52 mm · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Height: 27 mm · Angle: 90 ° · Width across flats nut: 7 mm
CHF 11.90
Dell'Orto 50° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Material: Brass · Surface: nickel-plated · Ø outside: 6 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Total length: 36.5 mm · Total length: 42 mm · Angle: 50 ° · Width across flats nut: 7 mm · Height: 40 mm · Height: 48 mm
CHF 11.90
Dell'Orto 40° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Material: Brass · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Total length: 30.5 mm · Total length: 37.5 mm · Internal thread: MF5x0.75 (fine pitch thread) · Height: 57 mm · Height: 67 mm · Angle: 40 ° · Ø outside: 6 mm
CHF 11.90
Not in stock
swiing® revival 80° carburetor pipe bend M6x0.75
Manufacturer: BING · Manufacturer: swiing® revival parts · Surface: nickel-plated · Material: Brass · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Total length: 41.5 mm · Total length: 50 mm · Height: 35 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 80 ° · Width across flats nut: 7 mm · Width across flats nut: 8 mm
CHF 6.90
90° carburetor pipe bend M7x0.75
Width across flats nut: 8 mm · Width across flats nut: 10 mm · Material: Brass · Ø outside: 7 mm · Carburetor type: 18 Catalyst · Total length: 47 mm · Total length: 53.5 mm · Carburetor type: 85 · Height: 29 mm · Internal thread: MF6x0.75 (fine pitch thread) · Angle: 90 ° · Thread type: MF7x0.75 (fine pitch thread) · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
CHF 11.90
swiing® revival 90° carburetor pipe bend M6x0.75
Manufacturer: swiing® revival parts · Material: Brass · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Total length: 40 mm · Total length: 49 mm · Height: 32 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 90 ° · Width across flats nut: 7 mm · Width across flats nut: 8 mm
CHF 6.90
Moped fans like you also bought:
BING 15 mm Bing original carburetor (1/15/46A)
Manufacturer: BING · Material: Aluminum · Nominal diameter: 15 mm · Choke control: Hand choke · Carburetor type: SRE · Total length: 66 mm · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Width: 50 mm · Height: 95 mm · Nozzle size: 82 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Area of application: Standard · Area of application: Tuning · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: No · Clamping screw torque (max.): 4 N/m
CHF 133.70
swiing® revival special nut M6 SW8 (sprocket ref. back pedal / intake manifold)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Nut type: Hexagon nut · Height: 6 mm · Thread type: M6x1 (standard thread) · Width across flats SW: 8 mm
CHF 2.90
swiing® revival 90° carburetor pipe bend M6x0.75
Manufacturer: swiing® revival parts · Material: Brass · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Total length: 40 mm · Total length: 49 mm · Height: 32 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 90 ° · Width across flats nut: 7 mm · Width across flats nut: 8 mm
CHF 6.90
BAD ASS 17 mm intake manifold (short) Bing SRE | Sachs 503 2AL/2BL
Manufacturer: BAD ASS · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Hole spacing inlet: 32 mm · Total length: 65 mm · Ø External connection: 20 mm · Ø inside: 17.8 mm · Mounting type: Stud bolt · Number of fixing points: 2 pcs · Height flange center hole: 45 mm · Total height: 55 mm
CHF 74.90
Collection only possible with online purchase and appointment.
