H.905 brake caliper for various front and rear wheels on Sachs and Hercules mopeds, mopeds with automatic engines.
The workmanship is good and the brake plate fulfills its purpose without any problems. Only a little copper grease on the brake cam and a slightly thicker washer to reduce the play would be beneficial.
Suitable add-on parts such as brake pads, the aforementioned grease and a suitable adjusting screw can be found in the accessories section.
Details
Ø outside | 107 mm |
Material | Steel |
Surface | blue galvanized |
Ø drum | 90 mm |
Ø bore | 12.2 mm |
Ø axle | 10 mm |
Wide cam holder | 10 mm |
Brake lever length (lever length) | 65 mm |
Cranking (offset) | 15 mm |
Suitable for the following models
Sachs | |
Hercules |
Accessories & related products
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm
CHF 2.40
Eurol copper grease 100 g
Manufacturer: Eurol · Area of application: Chemistry · Area of application: Fat · Contents [g]: 100 g · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Hazard warning: Very toxic to aquatic organisms · Signal word: Danger · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Temperature resistance (min.): -40 - 1100 °C
CHF 11.90
CHF 119.00/kg
Magura set screw M6x34 mm lock nut SW10
Manufacturer: Magura · Material: Brass · Surface: nickel-plated · Ø cable holder: 3.05 mm · Ø Receptacle: 7.05 mm · Thread type: M6x1 (standard thread) · Slotted: No · Total length: 34 mm · Width across flats Screw: 8 mm · Width across flats nut: 10 mm · Thread length: 23 mm
CHF 2.50
Stop nut M6 Inox
Drive: External hexagon · Material: Chrome steel (stainless steel) · Nut type: Self-securing nut · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread)
CHF 0.70
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Drive: External hexagon · Drive: Slot · Width across flats SW: 7 mm · Total length: 15 mm · Ø outside: 8 mm · Manufacturer: Magura · Material: Brass · Area of application: Standard · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.3 mm · Ø Bundle: 6 mm · Screw head: Hexagon · Thread length: 7 mm
CHF 2.50
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm
CHF 2.40
Magura set screw M6x34 mm lock nut SW10
Manufacturer: Magura · Material: Brass · Surface: nickel-plated · Ø cable holder: 3.05 mm · Ø Receptacle: 7.05 mm · Thread type: M6x1 (standard thread) · Slotted: No · Total length: 34 mm · Width across flats Screw: 8 mm · Width across flats nut: 10 mm · Thread length: 23 mm
CHF 2.50