High-quality brake cable (inner cable) suitable for various brake levers on various mopeds, mopeds and small motorcycles.
This cable was also used on motorcycles such as Puch, Puch Maxi, Sachs, Hercules, Pony, Solex, Zündapp or for the rear brake on Piaggio Ciao, Si, Bravo and Boxer mopeds.
Ø Brake cable: 1.8 mm
Cable length: 2.2 m (= 220 cm)
Ø Nipple: 3.5 / 6 mm
Nipple length: 10 mm
Further cable and cable cable parts can be found at Züng. You can find more cable pull parts in the accessories section.
A quality product made in Germany.
Details
| Cable length | 2200 mm |
| Nipple shape | Pears |
| Ø nipple | 3.5 mm, 6 mm |
| Nipple length | 10 mm |
| Manufacturer | Made in Germany |
| Material | Steel |
| Area of application | Standard |
| Surface | galvanized (blue) |
| Ø Stranded wire | 1.8 mm |
| Number of components | 1 pcs |
Suitable for the following models
| Universal | |
| Puch | |
| Sachs | |
| Pony / Cilo (Beta 521 & 512) | |
| Piaggio | |
| Zündapp Belmondo | |
| Tomos |
Accessories & related products
Motorex Spray Intact 200 ml
Manufacturer: Motorex · Contents [ml]: 200 ml · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Area of application: Workshop accessories
CHF 14.70
CHF 73.50/l
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø outside: 8 mm · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Ø Bundle: 6 mm · Width across flats SW: 7 mm · Total length: 15 mm · Screw head: Hexagon · Thread length: 7 mm · Area of application: Standard
CHF 2.50
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 2200 mm · Number of components: 1 pcs · Nipple length: 5 mm · Area of application: Standard
CHF 2.80
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Ø Stranded wire: 1.5 mm · Nipple shape: Barrel (transverse) · Ø nipple: 8 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 1600 mm · Area of application: Standard · Number of components: 1 pcs · Nipple length: 12 mm
CHF 2.80
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø outside: 5 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Thread length: 4 mm · Number of components: 2 pcs
CHF 2.00
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 2250 mm · Number of components: 1 pcs · Nipple length: 10 mm · Area of application: Standard · Piaggio OEM number: 270460
CHF 2.40
Collection only possible with online purchase and appointment.
