High-quality starter cable (inner cable) suitable for the E50 engines, which were installed on Puch Maxi mopeds.
This starter clutch cable can also be used universally for motorcycles such as Puch, Puch Maxi, Sachs, Hercules, Pony, Solex, Tomos, Zündapp, etc.
Ø Starter wire: 1.5 mm
Cable length: 1.60 m (= 160 cm)
Ø Nipple: 8 mm
Nipple width: 12 mm
A quality product made in Germany.
Details
Ø nipple | 8 mm |
Nipple length | 12 mm |
Manufacturer | Made in Germany |
Material | Steel |
Surface | galvanized (blue) |
Ø Stranded wire | 1.5 mm |
Number of components | 1 pcs |
Nipple shape | Barrel (transverse) |
Area of application | Standard |
Cable length | 1600 mm |
Suitable for the following models
Puch |
Accessories & related products
Motorex Spray Intact 200 ml
Manufacturer: Motorex · Contents [ml]: 200 ml · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Area of application: Workshop accessories
CHF 14.70
CHF 73.50/l
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø outside: 8 mm · Width across flats SW: 7 mm · Total length: 15 mm · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Ø Bundle: 6 mm · Screw head: Hexagon · Area of application: Standard · Thread type: M6x1 (standard thread) · Thread length: 7 mm
CHF 2.50
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Area of application: Standard · Cable length: 2200 mm
CHF 2.80
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Area of application: Standard · Cable length: 2200 mm
CHF 2.40
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø outside: 5 mm · Number of components: 2 pcs · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
CHF 2.00
Magura cable clamp Ø 7 x 9 mm
Manufacturer: Magura · Material: Chrome steel (stainless steel) · Material: Steel · Surface: blank · Surface: galvanized (blue) · Ø outside: 7 mm · Number of components: 1 pcs · Width across flats SW: 6 mm · Total length: 9 mm · Total length: 14.5 mm · Ø Cable bushing: 2.5 mm · Drive: External hexagon · Drive: Slot · Screw head: Countersunk head · Screw head: Hexagon · Area of application: Standard · Thread type: M4x0.7 (standard thread) · Thread length: 6 mm
CHF 2.50
Brake cable Ø 1.8 mm x 185 cm (nipple ball)
Ø nipple: 5.8 mm · Nipple length: 6.3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.8 mm · Nipple shape: Ball · Area of application: Standard · Cable length: 1850 mm
CHF 2.40