Membrane system
Stage6 lung aluminum
Total height: 40 mm · Manufacturer: Stage6 · Area of application: Tuning · Material: Aluminum · Ø inside: 4 mm · Color: Chrome · Surface: chrome-plated · Ø External connection: 6 mm · Total length: 105 mm · Total length: 125 mm · Mounting type: Cable ties · Camouflaged: No
CHF 47.40
Malossi diaphragm insert carbon 0.3 mm | Peugeot 103 / BYE BIKE
Manufacturer: Malossi · Thickness: 3 mm · Area of application: Tuning · Material: Plastic · Surface: raw · Number of flaps: 1 pcs · Membrane material: Carbon · Thick membrane platelets: 0.3 mm · Mounting type: Screws · Total length: 50 mm · Number of fixing points: 4 pcs · Ø mounting hole: 5.4 mm · Width: 43 mm · Width: 47 mm · Hole pattern [mm]: 32 / 36 x 39 · Camouflaged: No
CHF 29.90
Stage6 reed valve V-Force 3 by Moto Tassinari | Minarelli
Manufacturer: Stage6 · Area of application: Racing · Area of application: Tuning · Material: Plastic · Number of flaps: 8 pcs · Membrane material: Carbon · Thick membrane platelets: 0.3 mm · Mounting type: Screws · Total length: 76 mm · Number of fixing points: 4 pcs · Ø mounting hole: 6.5 mm · Width: 68 mm
CHF 99.90
Not in stock
Polini 4-flap diaphragm insert
Manufacturer: Polini · Area of application: Tuning · Material: Plastic · Material: Sheet metal (steel) · Surface: raw · Number of flaps: 4 pcs · Membrane material: Carbon · Thick membrane platelets: 0.3 mm · Mounting type: Stud bolts & nuts · Total length: 72.9 mm · Number of fixing points: 4 pcs · Width: 47.9 mm · Hole pattern [mm]: 35 x 60 · Camouflaged: No
CHF 79.90
Polini diaphragm plate carbon 0.3 / 0.35 mm
Manufacturer: Polini · Area of application: Racing · Area of application: Tuning · Material: Carbon · Number of flaps: 4 pcs · Membrane material: Carbon · Thick membrane platelets: 0.3 mm · Thick membrane platelets: 0.35 mm · Mounting type: Screws · Total length: 38 mm · Number of fixing points: 2 pcs · Ø mounting hole: 3 mm · Hole spacing: 17 mm · Width: 36 mm · Camouflaged: No
CHF 29.90
Malossi MHR diaphragm intake system PHGB
Manufacturer: Malossi · Area of application: Tuning · Material: Aluminum · Material: Viton · Number of flaps: 2 pcs · Membrane material: Carbonite · Ø inside: 24.5 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Ø mounting hole: 6.5 mm · Hole pattern [mm]: 60 x 35 / 61 x 40 · Camouflaged: No
CHF 99.90
Malossi reed valve block MHR TEAM VL16
Width: 48.3 mm · Manufacturer: Malossi · Material: Plastic · Number of flaps: 2 pcs · Membrane material: Carbon · Total length: 66.2 mm · Thick membrane platelets: 0.35 mm · Ø mounting hole: 6.6 mm · Hole spacing: 53 mm · Number of fixing points: 2 pcs · Mounting type: Screws · Camouflaged: No · Area of application: Racing
CHF 91.90
Membrane systems and accessories for your Piaggio moped
With conventional intake systems, targeted intake control on your moped can only be achieved to a limited extent. Especially if your plan is to get more power out of your moped, you are therefore certainly looking for convincing alternatives. As usual, you will find these alternatives and convincing solutions in the mofakult range. Especially for your Piaggio moped, we offer reed intake systems that work with reed plates in various thicknesses. They offer the advantage that the intake can be controlled much more precisely. They also very reliably prevent the mixture from flowing back into the carburettor on your Piaggio moped. Thanks to the plates, the engine develops noticeably more power in the lower rev range, significantly improving the acceleration of your Piaggio moped. Of course, you will also find many other components. From the matching reed valve to the complete side intake set and intake system with reed valve technology, you can choose from a huge selection of high-quality replacement, reproduction or original parts in our shop.
Fitting an intake system or side inlet set to a moped: a task for experienced mechanics
Fitting a diaphragm system including discs to your Piaggio moped is quite a demanding task. You should already have some experience in screwing, patience and a little dexterity to master the installation. It is therefore best to get tips and help from friends and acquaintances who are familiar with this and, ideally, have already fitted a Pinasco side inlet set or similar. Of course, we also offer some tutorials on this topic on our YouTube channel and in our blog. By the way: You can directly influence the intake control on your Piaggio moped by using diaphragm plates or a diaphragm tongue in different thicknesses.
Membrane discs from Malossi, Pinasco and other well-known manufacturers
Of course, the notorious parts manufacturers Pinasco and Malossi also offer custom-fit, high-quality components for the reed valve and intake system of your Piaggio moped. Side inlet sets and complete intake systems from these parts manufacturers are therefore among the most frequently used systems on Piaggio mopeds. Equipped with high-quality diaphragm plates, they ensure perfect interaction between the carburettor and intake system. A Polini flap diaphragm insert is also a good choice for your Piaggio moped. We offer all these systems, including matching reed plates and installation accessories, at attractive prices.
Order diaphragm plates, complete intake systems and additional components at mofakult
In our range, you will discover high-performance components for optimising your existing reed valve system as well as the right reed valve tongue or a complete intake system or side intake set for your Piaggio moped. As always, we offer you high-quality branded goods from reed plates to other parts for intake and carburettor tuning on your Piaggio moped at fair prices and with short delivery times directly from stock. If you need help or advice with your selection, just give us a call or drop us an e-mail. We will be happy to advise you.
Collection only possible with online purchase and appointment.
