Stage6 VForce 3 reed valve block for the ADDY GME engine housing «Der.prüfstand» on your Puch moped / moped.
The V-Force 3 reed valve block was developed in close cooperation with the renowned American manufacturer Moto Tassinari, which is known for its high-performance reeds in the field of cross engines. Its innovative, patented design with the double V-diaphragm (consisting of 8 vanes) is optimized for flow and passage. This leads to significantly improved filling of the crankshaft housing, as the intake cross-section and the reed surface area are almost doubled.
Matching intake manifolds, the reed box and the racing case can also be found in the accessories section.
Quality product from the German manufacturer Stage6.
Details
Manufacturer | Stage6 |
Number of flaps | 8 pcs |
Hole spacing | 52 mm |
Suitable for the following models
Universal | |
Puch | E50 |
Accessories & related products
Stage6 R/T RT-PWK 28 mm carburetor *Black Edition*
Manufacturer: Stage6 R/T · Color: black · Surface: varnished · Nominal diameter: 28 mm · Carburetor type: RT-PWK · Ø Air filter connection: 50 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Mounting type: Flange · Nozzle thread: M5 · Mounting type: Plug connection · Area of application: Tuning
CHF 174.90
Stage6 R/T RT-PWK 24 mm carburetor Stage6 *Black Edition*
Manufacturer: Stage6 R/T · Color: black · Surface: varnished · Nominal diameter: 24 mm · Carburetor type: RT-PWK · Ø Air filter connection: 50 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Mounting type: Flange · Nozzle thread: M5 · Mounting type: Plug connection · Area of application: Tuning
CHF 167.90
Not in stock
Moped fans like you also bought:
HK Clutch "Racing" Kickstarter | Puch E50
Manufacturer: HK Clutches · Material: Steel · Material addition: Aluminum · Recording type: Cone mounting · Ø inside: 13.6 mm · Ø inside: 14.6 mm · Number of jaws: 3 pcs · Number of springs: 3 pcs · Ø outside: 93 mm · Thickness: 20.3 mm · Area of application: Racing
CHF 309.90
Stage6 R/T RT-PWK 24 mm carburetor Stage6 *Black Edition*
Manufacturer: Stage6 R/T · Color: black · Surface: varnished · Nominal diameter: 24 mm · Carburetor type: RT-PWK · Ø Air filter connection: 50 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Mounting type: Flange · Nozzle thread: M5 · Mounting type: Plug connection · Area of application: Tuning
CHF 167.90
Not in stock
swiing® ingenious crankshaft High End with mounted bearings (Version 2.0) | Puch E50
Manufacturer: swiing® ingenious parts · Weight: 968 g · Material: Aluminum · Material: Steel · Cheek type: Full cheeks · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Thread type: MF10x1 (fine pitch thread) · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread length: 11 mm · Thread length: 15 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Area of application: High End · Area of application: Racing · Area of application: Tuning · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Number of gears: 1 pcs
CHF 178.90
Not in stock