Flammenrohr
Sort:Popularity
swiing® revival stud bolts M6x38 inlet/outlet galvanized (10.9 strength)
Material: Steel · Surface: blue galvanized · Manufacturer: swiing® revival parts · Diameter: 5.9 mm · Total length: 38 mm · Thread type: M6x1 (standard thread) · Thread length: 11 mm · Thread length: 19 mm · Strength class: 10.9
CHF 2.00
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Thickness: 3 mm · Place of use: Exhaust · Material: Graphite / Graphite · Reinforced: No · Ø outlet inside: 28 mm · Ø inside: 27.4 mm · Area of application: Tuning · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm
CHF 7.40
Gasket outlet Ø 27 mm large
Manufacturer: Made in Italy · Material: Sealing carton · Material: Sheet metal (steel) · Ø inside: 26.3 mm · Ø outside: 44 mm · Place of use: Outlet · Ø mounting hole: 6.9 mm · Number of fixing points: 2 pcs · Hole spacing: 42 - 56.8 mm · Thickness: 2 mm
CHF 2.70
Not in stock
GPO exhaust clamp solid 28 - 30 mm galvanized (strength 12.9)
Manufacturer: GPO · Material: Steel · Color: silver · Surface: blue galvanized · Width: 42.5 mm · Total length: 46 mm · Mounting type: Nuts & bolts · Ø inside: 28 - 30 mm · Ø outside: 41 mm · Material thickness: 1.6 mm · Pony spare part no.: A1897 · Sachs spare part no.: 0251 113 105
CHF 7.90
swiing® revival Set stud bolts M6x30 (strength 10.9) galvanized
Manufacturer: swiing® revival parts · Thread length: 12 mm · Diameter: 6 mm · Material: Steel · Surface: blue galvanized · Thread type: M6x1 (standard thread) · Total length: 30 mm · Drive: External hexagon · Strength class: 8 · Width across flats SW: 10 mm · Strength class: 10.9
CHF 10.60
MOTIP heat-resistant paint black 400 ml
Manufacturer: MOTIP · Area of application: Paint & varnish · Color: black · Contents [ml]: 400 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Temperature resistance (min.): 0 - 800 °C
CHF 24.90
Not in stock
CHF 62.25/l
swiing® revival stud bolt set M6x38 (strength 10.9) galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: M6x1 (standard thread) · Total length: 38 mm · Thread length: 12 mm · Thread length: 20 mm · Width across flats SW: 8 mm · Strength class: 8 · Strength class: 10.9 · Drive: External hexagon
CHF 10.60
Motorex black high temperature paint 400 ml
Temperature resistance (min.): 0 - 400 °C · Manufacturer: Motorex · Lacquer type: Plastic paint · Area of application: Paint & varnish · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Color: black · Contents [ml]: 400 ml · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous
CHF 22.90
CHF 45.80/l
swiing® ingenious flame tube 28 mm chrome | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Material: Steel · Color: Chrome · Surface: chrome-plated · Total length: 380 mm · Mounting type: Stud bolts & nuts · Ø inside: 25 mm · Number of fixing points: 2 pcs · Ø outside: 28 mm · Hole spacing outlet: 42 mm
CHF 39.90
CHF 49.90
swiing® ingenious flame tube 28 mm chrome | Puch Supermaxi LG1, LG2
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Ø inside: 25.5 mm · Ø outside: 28 mm · Total length: 300 mm · Color: Chrome · Hole spacing outlet: 40 mm · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs
CHF 39.90
Flame tube 22 mm | Puch
Thread type: M7x1 (standard thread) · Ø inside: 18.2 mm · Ø outside: 22 mm · Manufacturer: Made in Portugal · Total length: 900 mm · Material: Steel · Surface: chrome-plated · Color: Chrome · Number of fixing points: 2 pcs · Hole spacing outlet: 42 mm · Flame tube attachment: Thread for screwing · Mounting type: Stud bolts & nuts
CHF 24.50
GPO flame tube 22 mm | Puch X30 Velux
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Thread type: M7x1 (standard thread) · Total length: 900 mm · Color: Chrome · Number of fixing points: 2 pcs · Ø inside: 20 mm · Hole spacing outlet: 42 mm · Ø outside: 22 mm · Mounting type: Stud bolts & nuts · Flame tube attachment: Thread for screwing
CHF 65.90
Flame tube 25 mm | Puch E50, ZA50, Z50
Manufacturer: Made in Switzerland · Material: Steel · Surface: chrome-plated · Ø outside: 25 mm · Total length: 905 mm · Color: Chrome · Ø inside: 22 mm · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Thread type: M7x1 (standard thread) · Hole spacing outlet: 42 mm
CHF 109.90
MOTIP heat-resistant clear lacquer (matt) 400 ml
Manufacturer: MOTIP · Area of application: Paint & varnish · Color: transparent · Contents [ml]: 400 ml · Hazard warning: Causes serious eye damage · Hazard warning: Extremely flammable aerosol · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Temperature resistance (min.): 0 - 800 °C
CHF 24.90
Not in stock
CHF 62.25/l
Page 1 of 2
Looking for a flame pipe or exhaust for your Puch moped?
The days when legendary moped models such as the Maxi and X30 mopeds rolled off the production line at Austrian manufacturer Puch are unfortunately long gone. Fortunately, however, the beautiful gems of the two-wheeler manufacturer from our neighbouring country can still be admired more frequently on the roads. If you own one of the legendary Austro-Moped yourself, then you know exactly how much effort and passion it takes to maintain the beauty and roadworthiness of your pearl. Because wear and tear gnaws relentlessly at your motorbike. This is especially true for the exhaust system and the flame tube of your moped, as rust is particularly common here. If you need to replace the entire exhaust system of your Puch moped or individual parts of it due to corrosion, we have the right parts for you. From manufacturers and brands such as Tecno, swiing and GPO, we offer original exhausts for numerous models as well as the right racing exhaust if you want more power and a richer sound for your moped.
Replace corroded flame pipe on your Puch moped or install racing exhaust
Even if you are not an experienced mechanic, it should not be too difficult for you to replace the flame pipe or even the complete silencer on your Puch moped. All you have to do is first loosen the screws at the few fixing points on your moped exhaust and then carefully remove the exhaust system. The new system is then simply installed in reverse order. If you decide in favour of a type-specific flame pipe for a Puch moped, you can use the existing fixing points. With universal parts, some customisation work is sometimes necessary. To do this, you can order custom-fit exhaust clamps and clamps as well as durable seals, for example for the exhaust, from our range for a small amount of money. In just a few minutes, you can ensure an optimum exhaust flow on your moped or even more power if you combine a racing exhaust with a corresponding tuning setup.
Always pay attention to quality when buying a new silencer or flame tube
Tecno, swiing or GPO are just some of the brands from which you can find the right flame pipe or even a complete exhaust for your moped in our shop. You will also discover rare NOS parts for some Puch models from old stocks. When you order a new flame tube for a Puch-Hödi from us, you are always choosing excellent workmanship and parts that you will enjoy for a long time. First-class quality parts that fulfil even the highest demands in terms of appearance, accuracy of fit and performance await you in our range. In addition to the right flame tube and other parts for the exhaust system on your scooter, our range naturally also includes all relevant parts for the engine of your scooter. These include cylinders, intake manifolds, standard and oversize pistons and spare parts for many other assemblies.
Order here at a fair price: Exhaust silencer and flame pipe for Puch mopeds
Whether exhaust silencer, flame pipe or racing exhaust, you will find all the parts you need for your Puch moped in outstanding quality and at fair prices. What's more, almost every exhaust and flame tube for Puch models is available directly from stock, so you can count on fast delivery of your order. If you can't find a suitable original or reproduction part, just get in touch with us. Drop us an e-mail or give us a call. We will be happy to help you and answer your questions.
Collection only possible with online purchase and appointment.
