Original ivory-colored plastic cable duct for your Piaggio Si moped / moped.
The cable cover is flawlessly finished and fits perfectly.
The cable tunnel is mounted underneath the tank and ensures clean routing of all cables. The throttle, deco and rear brake cables as well as the wiring harness are pulled through the cable cover.
The cable routing has an opening for the horn.
Total length: 305 mm
Ø horn cut-out: 55 mm
Horn hole circle: 65 mm
A matching horn and screws for attaching the cable tray can be found in the accessories section.
Original Piaggio spare part number: 212333, 186138, 91800, 217709, 921300, 921363, 921352
A quality product made in Italy.
Details
Color | ivory |
Manufacturer | Made in Italy |
Material | Plastic |
Total length | 305 mm |
Number of fixing points | 3 pcs |
Piaggio spare part no. | 212333, 186138, 91800, 217709, 921300, 921363, 921352 |
Suitable for the following models
Piaggio | Si |
Accessories & related products
swiing nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Total length: 8 mm · Manufacturer: swiing · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA (type 3) · Carburetor type: SHA (type 4) · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70
CHF 20.90
Stand set | Piaggio SI
Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 225 mm · Total width of stand base (B): 220 mm · Wide receptacle (C): 89 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 265 mm
CHF 24.90
SITO Plus exhaust Ø 24 mm | Piaggio SI
Number of fixing points: 1 pcs · Total length: 720 mm · Ø outside: 14 mm · Manufacturer: SITO · Material: Steel · Surface: varnished · Color: black · Ø Silencer: 70 mm · Ø Flame tube outside: 25 mm · Exhaust type: Cylindrical · Ø Internal connection: 22.3 mm · Mounting type: Welded lug · Flame tube attachment: Plug connection clamped
CHF 79.90
Malossi tuning set 43 mm | Piaggio SI, Bravo, Grillo
Manufacturer: Dell'Orto · Manufacturer: Malossi · Manufacturer: NGK · Manufacturer: SITO · Manufacturer: swiing · Camouflaged: No · Area of application: Tuning · Crankshaft stroke: 43 mm · Nominal diameter: 44 mm · Displacement: 65 ccm · Ø piston pin (B): 10 mm · Ø piston pin (B): 12 mm · Decompressor: Yes · Outlet type: clamped
CHF 376.80
Horn 6V 15W | Piaggio Ciao, SI, Bravo, Boxer
Number of fixing points: 6 pcs · Manufacturer: Made in Italy · Material: Steel · Surface: blue galvanized · Color: silver · Tension: 6 V · Type of current: Alternating current (AC) · Mounting type: Screws · Piaggio spare part no.: 93870
CHF 24.90
Not in stock
Dell'Orto 13/13 SHA carburetor & racing air filter set | Piaggio SI, Boss, Grillo
Total length: 55 mm · Manufacturer: Dell'Orto · Manufacturer: Malossi · Width: 60 mm · Height: 118 mm · Area of application: Tuning · Nominal diameter: 13 mm · Carburetor type: SHA (type 3) · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 18 mm · Ø Inside entrance: 13 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Ø Internal connection: 16 mm · Mounting type: Plug connection clamped · Choke control: Hand choke · Nozzle thread: M5 · Nozzle size: 66
CHF 75.90
Moped fans like you also bought:
Handlebar fork plate 30 cm curved with chrome strut
Clamping diameter: 22 mm · Ø outside: 22 mm · Manufacturer: Made in Germany · Width: 680 mm · Height: 270 mm · Material: Steel · Surface: chrome-plated · Color: Chrome · Fork plate holder length: 90 mm · Length handlebar ends: 155 mm · Crossbar: Yes · Mounting type: Fork plate
CHF 32.80
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
CHF 9.90
CHF 22.00/l