Special input shaft to convert your Piaggio Ciao, SI, Bravo, Boxer, Grillo moped / moped with mono gearbox to a variomatic gearbox.
The converter shaft is used instead of the pully shaft. The longer spacer sleeve and flange nut are used for the variator at the front so that the V-belt is aligned with the rear converter.
Please note:
- The gearbox must be designed for two sprockets (with raised bearing seat for the input shaft), see Figure 3 (not included in the scope of delivery).
- A transmission ratio of 6.73 / 1 (ID 2 // 990505 (12B/12C)), with an 11 tooth input shaft and large gear with 74 teeth.
- This above mentioned gear ratio was not installed in Switzerland by default, so check your gearbox before buying the shaft or order the matching gear from the accessories below.
- The gear ratio of 6.73 is very long. A powerful engine is required to be able to extend the transmission.
- As the torque converter and the vario are mounted slightly further out, adjustments to the side shift may be necessary.
Suitable accessories, such as torque converters, variomats, the additionally required transmission sprocket or V-belts, can be found in the accessories section.
A quality product made in Italy.
Details
| Manufacturer | Made in Italy |
| Material | Steel |
| Gearbox type | Vario |
| Toothing type | straight toothed |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
Moderate Casual 
Olympia torque converter Vario Ø 100 mm | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Olympia · Material: Steel · Surface: blue galvanized · Surface: burnished · Number of springs: 3 pcs · Thickness: 74 mm · Number of jaws: 3 pcs · Angle pulley: 17 ° · Ø outside: 100 mm · Gearbox type: Vario · Hardness level Counter pressure spring: Standard (30 kg - steel-colored) · Weight: 1930 g
CHF 139.90
Moped fans like you also bought:
swiing® ingenious needle roller bearing 12/15/16.2 "Racing" silver cage
Bearing cage: Silver cage · Width: 16.2 mm · Dimension needle bearing: 12/15 x 16.2 · Manufacturer: swiing® ingenious parts · Bearing type: Needle roller and cage assembly · Ø inside: 12 mm · Ø outside: 15 mm · Tomos spare part no.: 035548
CHF 13.90
Hot 
Leonelli 12V voltage regulator (1A quality)
Total length: 50 mm · Width: 27 mm · Height: 15 mm · Manufacturer: Leonelli · Ø mounting hole: 6 mm · Material: Aluminum · Material: Plastic · Surface: blue galvanized · Tension: 12 V · Performance: 100 W · Type of current: Alternating current (AC) · Mounting type: Screws
CHF 34.90
swiing nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
Manufacturer: swiing · Material: Brass · Total length: 8 mm · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA (type 3) · Carburetor type: SHA (type 4) · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92
CHF 20.90
EFFE Condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Height: 26 mm · Manufacturer: EFFE · Ø mounting hole: 4.4 mm · Capacity: 0.26 µF · Area of application: Original · Area of application: Standard · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø outside: 18 mm · Piaggio spare part no.: 102939
CHF 11.90
SITO Plus exhaust Ø 24 mm | Piaggio Ciao, Bravo
Manufacturer: SITO · Material: Steel · Surface: varnished · Color: black · Ø outside: 14 mm · Ø Silencer: 70 mm · Number of fixing points: 1 pcs · Ø Internal connection: 22 mm · Ø Flame tube outside: 24 mm · Exhaust type: Cylindrical · Mounting type: Welded lug · Total length: 690 mm · Flame tube attachment: Plug connection clamped
CHF 74.90
Collection only possible with online purchase and appointment.
