Racing variator from Pinasco for your Piaggio Ciao, Si, Bravo, Boxer moped / moped with variomatic drive.
This variator impresses with its clean workmanship and, with its optimized roller tracks and pitch angles, ensures constant acceleration and more top speed than the original.
In terms of performance, the three racing variators from Polini, Malossi and Pinasco are closely matched. Even after countless kilometers of testing, we were unable to detect any significant differences.
The scope of delivery includes 6 gram weights. However, we recommend a set with a larger selection of weights (16 x 13 mm) for tuning. With souped-up engines, the belt often tends to slip, which is why we recommend that you also change the counter-pressure spring in the torque converter. This is also included in the scope of delivery.
If you have a Piaggio Ciao, you should also not use the Polini drive belt (item 24013), but the Bosch V-belt (item 29570), as the Polini belt is too narrow at the top.
The parts described above and other parts for your Vario drive can be found in the accessories section.
Quality product from the Italian manufacturer Pinasco.
Details
Manufacturer | Pinasco |
Number of weights | 6 pcs |
Weight Standard weights | 6 g |
Ø Weights | 16 mm |
Length Weights | 13 mm |
Gearbox type | Vario |
Suitable for the following models
Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
Stage6 6.5 - 9.5 g vario weight set Ø 16 x 13 mm
Manufacturer: Stage6 · Gearbox type: Vario · Number of weights: 24 pcs · Weight Standard weights: 6.5 g · Weight Standard weights: 7.5 g · Weight Standard weights: 8.5 g · Weight Standard weights: 9.5 g · Ø Weights: 16 mm · Length Weights: 13 mm
CHF 32.90
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
CHF 2.80
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø outside: 5 mm · Total length: 6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Manufacturer: Magura · Thread length: 4 mm · Ø Cable bushing: 1.6 mm · Number of components: 2 pcs · Material: Brass · Material: Steel · Surface: nickel-plated
CHF 2.00
swiing® revival sliding block (for screwing) Magura throttle twist grip
Manufacturer: swiing® revival parts · Material: Aluminum · Surface: anodized · Width: 7.7 mm · Thread type: M4x0.7 (standard thread) · Thread length: 8.8 mm · Total length: 12 mm · Height: 8.8 mm · Drive: Hexagon socket · Color: black
CHF 9.90
GPO 85° carburetor pipe bend brass M6x0.75
Manufacturer: GPO · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Angle: 85 ° · Ø outside: 6 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF6x0.75 (fine pitch thread) · Total length: 45.5 mm · Total length: 53.5 mm · Height: 30 mm · Width across flats nut: 8 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
CHF 5.90
Stand 14 mm axle (1A quality) | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 232 mm · Total width of stand base (B): 200 mm · Wide receptacle (C): 78 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 250 mm
CHF 29.90
swiing® revival locking plate nut Variomatic Inox | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: blank · Area of application: Original · Area of application: Standard · Number of lobes: 1 pcs · Ø inside: 8.15 mm · Ø outside: 33.5 mm
CHF 3.40