Reinforced upside-down fork from the EBR brand suitable for various Puch mopeds.
The black-painted, solid fork was modeled on the original Puch chopper fork.
You can find the matching headset set and other accessories below.
Total length: 69 cm
Head tube length: 180 mm
Ø stanchion tube: 28 mm
Ø fork tube: 35 mm
Internal diameter of head tube (for stem mounting): 22 mm
Branded product from the Italian manufacturer EBR.
Details
Manufacturer | EWC |
Material | Steel |
Surface | varnished, chrome-plated |
Ø spars | 28 mm |
Color | black, Chrome |
Ø head tube inside | 22 mm |
Head tube length | 180 mm |
Total length | 690 mm |
Suitable for the following models
Puch |
Accessories & related products
swiing® revival snap ring low control bearing set (version 2.0)
Height: 7 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blank · Thickness: 0.6 mm · Nominal diameter: 20 mm · Nominal diameter: 28 mm · Puch spare part no.: 349.1.30.015.1 · Sachs spare part no.: P0521
CHF 2.50
GPO steerer tube nut M26x1 closed fork plate chrome
Height: 13.8 mm · Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Area of application: Standard · Nut type: Cap nut · Thread type: MF26x1 (fine pitch thread) · Drive: External hexagon · Ø outside: 28.9 mm · Ø outside: 36.4 mm · Thread depth: 12 mm · Width across flats SW: 30 mm
CHF 9.90
GPO steerer tube nut M26x1 open stem chrome
Height: 14 mm · Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Nut type: Flange nut · Thread type: MF26x1 (fine pitch thread) · Drive: External hexagon · Ø inside: 22.1 mm · Ø outside: 36.5 mm · Thread depth: 11.5 mm · Width across flats SW: 30 mm
CHF 12.90
Moped fans like you also bought:
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Area of application: Standard · Ø outlet inside: 19.9 mm · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
CHF 9.90
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Width: 123 mm · Width: 230 mm · Width: 330 mm · Height: 26 mm · Height: 60 mm · Height: 65 mm · Place of use: Frame (+ tank) · Material: Polyvinyl chloride (PVC-U_hard) · Color: black · Color: white · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant
CHF 9.40
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
CHF 9.90
GPO Brake support bolt short Inox | Puch Maxi, Supermaxi
Manufacturer: GPO · Number of components: 3 pcs · Material: Chrome steel (stainless steel) · Thread type: MF10x1 (fine pitch thread) · Drive: Outer edge · Ø shaft: 9.8 mm · Ø External head: 14 mm · Area of application: Standard · Width across flats SW: 13 mm · Width across flats SW: 17 mm · Shank: Yes · Thread length: 13 mm · Shank length: 9.5 mm · Total length: 32 mm
CHF 12.90
swiing® revival wheel axle set M12x1 x 165 mm cast & spoke hubs | Puch
Manufacturer: swiing® revival parts · Diameter: 12 mm · Material: Steel · Surface: blue galvanized · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.95 mm · Width across flats SW: 19 mm · Thread length: 40 mm · Thread length: 50 mm · Shank length: 75 mm · Total length: 165 mm
CHF 29.90