Inox

Short version of the bolt for holding the support plate (brake anchor plate) made of stainless steel for your Puch Maxi S, N, S-2A / Supermaxi LG1, LG2 mopeds
Including M10x1 nut and matching washer.

Total length: 32 mm
Ø bolt: 9.8 mm
Thread: M10

The M10x1 nut and a matching washer for the stud are included in the scope of delivery.

Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.

Original Puch spare part number: 349.1.41.008.1

Details

Total length	32 mm
Manufacturer	GPO
Material	Chrome steel (stainless steel)
Area of application	Standard
Thread type	MF10x1 (fine pitch thread)
Ø shaft	9.8 mm
Drive	Outer edge
Ø External head	14 mm
Thread length	13 mm
Shank	Yes

Shank length	9.5 mm
Number of components	3 pcs
Width across flats SW	13 mm, 17 mm

Suitable for the following models

Puch

E50

ZA50 (Fahrtwindgekühlt)

Accessories & related products

Rear brake plate incl. brake shoes | Puch Maxi S

For: Puch

10441

Rear brake plate incl. brake shoes | Puch Maxi S

CHF 59.90

Inox

Set

GPO brake cam & retaining plate set | Puch Maxi N

For: Puch

19616

GPO brake cam & retaining plate set | Puch Maxi N

Manufacturer: GPO · Material: Chrome steel (stainless steel) · Material: Steel · Surface: blue galvanized

CHF 20.90

swiing® revival brake cam rear wheel | Puch Maxi

For: Puch

22135

swiing® revival brake cam rear wheel | Puch Maxi

Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized

CHF 14.90

swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG

For: Puch

22298

swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG

Ø bore: 12.2 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Ø External brake pads: 80 mm · Ø axle: 12 mm · Ø outside: 91 mm · Ø screw holder: 6.5 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 55 mm · Total length: 187 mm · Cranking (offset): 8 mm

CHF 69.90

swiing® revival rear brake anchor plate | Puch Maxi N

For: Puch

22299

swiing® revival rear brake anchor plate | Puch Maxi N

Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Ø outside: 92 mm · Ø External brake pads: 80 mm · Ø axle: 12 mm · Ø shaft: 10 mm · Ø bore: 12.2 mm · Ø screw holder: 6.5 mm · Wide cam holder: 12 mm · Total length: 135 mm · Brake lever length (lever length): 68 mm · Cranking (offset): 10 mm

CHF 74.90

swiing brake shoes Ø 80 x 18 Racing slotted | Puch Maxi

For: Puch

23581

swiing brake shoes Ø 80 x 18 Racing slotted | Puch Maxi

Manufacturer: swiing · Ø drum: 80 mm · Width: 18 mm · Number of springs: 2 pcs · Springs included: Yes · Slotted: Yes · Area of application: Racing

CHF 19.90

Moped fans like you also bought:

swiing® revival cable guide mudguard black | Puch

For: Puch

10029

swiing® revival cable guide mudguard black | Puch

Manufacturer: swiing® revival parts · Total length: 74 mm · Material: Plastic · Color: black · Number of fixing points: 2 pcs · Height: 12.5 mm · Hole spacing: 63 mm · Mounting type: Plug connection

CHF 3.90

For: Puch

10077

GPO control bearing set M26x1 mm | Puch

Bearing type: Bearing ring · Manufacturer: GPO · Ø inside: 26.8 mm · Material: Steel · Surface: blue galvanized · Thread type: MF26x1 (fine pitch thread) · Color: silver · Ø outside: 41 mm · Ø mounting frame: 31 mm

CHF 11.90

Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom

Universal

10181

Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom

Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Reserve level: 70 mm

CHF 9.90

GPO cable duct black | Puch Maxi, Supermaxi

For: Puch

10256

GPO cable duct black | Puch Maxi, Supermaxi

Width: 58 mm · Height: 22 mm · Manufacturer: GPO · Material: Plastic · Color: black · Ø mounting hole: 5.3 mm · Total length: 320 mm · Number of fixing points: 2 pcs

CHF 7.90

GPO rear mudguard attachment 17" | Puch Maxi N

For: Puch

10451

GPO rear mudguard attachment 17" | Puch Maxi N

Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Wheel size [inch]: 17 " · Total length: 300 mm · Number of fixing points: 4 pcs · Ø mounting hole: 6 mm · Mounting type: Nuts & bolts

CHF 14.90

swiing® revival frame guard black | Puch Maxi N

For: Puch

10456

swiing® revival frame guard black | Puch Maxi N

Manufacturer: swiing® revival parts · Material: Plastic · Surface: raw · Color: black · Width: 54 mm · Height: 20 mm · Number of fixing points: 1 pcs · Ø mounting hole: 21.5 mm · Mounting type: Plug connection · Total length: 175 mm

CHF 19.90

For: Puch

10481

Exhaust mounting plate | Puch Maxi N

Manufacturer: Made in Portugal · Material: Steel · Surface: blue galvanized · Ø mounting hole: 8.5 mm · Ø mounting hole: 11 mm · Cranking (offset): 23 mm · Number of fixing points: 2 pcs

CHF 7.90

Inox

Set