18 mm replica exhaust suitable for Puch Maxi S & N mopeds.
The exhaust is a one-piece, welded, with the corresponding original number.
The M7 screw at the end of the flame pipe should always be locked with an additional nut, otherwise the nut may loosen and the muffler insert may fall out.
Attention: The sound of the replica exhaust systems can be slightly louder than the original, to remedy this, you can wrap wool around the muffler. You will find this in the accessories section below.
A quality product made in Portugal.
Details
Total length | 920 mm |
Manufacturer | Made in Portugal |
Number of fixing points | 4 pcs |
Material | Steel |
Surface | chrome-plated |
Color | Chrome |
Ø Silencer | 59 mm |
Ø Internal connection | 14 mm |
Ø Flame tube outside | 18 mm |
Mounting type | Welded lug |
Exhaust type | Flute |
Flame tube attachment | Flange |
Suitable for the following models
Puch | E50 ZA50 (Fahrtwindgekühlt) |
Accessories & related products
Stop nut M7 Inox
Material: Chrome steel (stainless steel) · Nut type: Self-securing nut · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon
CHF 0.70
Moped fans like you also bought:
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Width: 125 mm · Height: 55 mm · Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 mm · Area of application: Standard · Candle thread: short · Hole pattern [mm]: 44 x 44 · Total length: 135 mm · Number of fixing points: 4 pcs · Decompressor: No
CHF 32.90
swiing® revival 12 mm carburetor (original) | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Area of application: Standard · Color: gray · Carburetor type: SRE · Total length: 65 mm · Nominal diameter: 12 mm · Width: 50 mm · Ø Internal connection: 20 mm · Height: 108 mm · Ø Inside entrance: 12 mm · Mounting type: Plug connection clamped · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.15 · Nozzle size: 52 · Clamping screw torque (max.): 4 N/m
CHF 69.90
swiing® revival 12 mm intake manifold | Puch E50
Manufacturer: swiing® revival parts · Ø inside: 12 mm · Material: Aluminum · Hole spacing inlet: 38 mm · Total length: 45.5 mm · Area of application: Original · Mounting type: Screws · Height flange center hole: 43 mm · Total height: 53 mm · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Camouflaged: No
CHF 34.90
swiing® revival 38 mm original cylinder 1.6 PS | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: Yes · Area of application: Standard · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Nominal diameter: 38 mm · Ø cylinder neck: 48 mm · Ø Inlet inside: 9 mm · Ø outlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 42 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Decompressor: Yes · Hole spacing inlet: 38 mm · Alternative version of the Puch spare part no.: 349.7.10.105.0
CHF 104.90
swiing nozzle set M3.5 (50 - 60) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Quantity: 11 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5 · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60
CHF 21.90