Montageanleitung
Optimized, high-quality 38 mm original cylinder suitable for various Puch mopeds / mopeds such as Maxi S / N and Puch X30 NS / NL.
With this cylinder, you can reach your destination quickly and powerfully
.- The intake window has been moved downwards to achieve better timing
- Lubrication holes on the piston to the piston pin.
- The inner flats on the piston were milled flat for clean guidance of the connecting rod bearing
- The piston skirt has been optimized
- The inlet angles of the transfer ports have been adjusted
- Intake and exhaust largely milled flat (exhaust and intake manifold can be fitted without any problems)
With these optimizations, the 38 mm cylinder kit delivers a full 1.6 hp to the rear tire with the correct setting. This makes it the most powerful 38 mm cylinder with seal for Puch ever!
The original «CH12» is of course also cast in.
Attention: This cylinder is a replica product which is not approved for use on public roads.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Aluminum |
| Surface | sandblasted |
| Displacement | 50 ccm |
| Crankshaft stroke | 43 mm |
| Ø cylinder neck | 48 mm |
| Nominal diameter | 38 mm |
| Ø Inlet inside | 9 mm |
| Ø piston pin (B) | 12 mm |
| Ø outlet inside | 19 mm |
| Thread inlet | M6x1 (standard thread) |
| Area of application | Standard |
| Hole spacing outlet | 42 mm |
| Hole spacing inlet | 38 mm |
| Outlet type | straight |
| Number of fixing points | 4 pcs |
| Thread outlet | M6x1 (standard thread) |
| Hole pattern [mm] | 44 x 44 |
| Decompressor | Yes |
| Camouflaged | Yes |
| Alternative version of the Puch OEM number | 349.7.10.105.0 |
Suitable for the following models
| Puch | E50 Z50 (X30 Sport) |
Accessories & related products
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Surface: sandblasted · Material: Aluminum · Ø cylinder: 38 mm · Area of application: Standard · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No
CHF 32.90
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Number of components: 4 pcs · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 38 mm · Area of application: Standard · Ø outlet inside: 22 mm · Thickness: 0.3 mm · Thickness: 0.4 mm · Thickness: 1.8 mm · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
CHF 7.40
swiing® revival piston 38 mm Vertex | Puch
Manufacturer: Vertex · Manufacturer: swiing® revival parts · Nominal diameter: 38 mm · Ø outside piston (A): 37.96 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.45 mm · Curvature (D): 3.5 mm · Total piston height (E): 50.45 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 1.5 mm · Thick piston ring: 1.6 mm · Tolerance group: A · Piston weight: 71 g
CHF 59.90
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing type: Needle roller and cage assembly · Manufacturer: swiing® ingenious parts · Bearing cage: Silver cage · Width: 14.2 mm · Ø inside: 12 mm · Ø outside: 15 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony OEM number: A4222 · Alternative version of the Sachs OEM number: 0232 157 001 · Tomos OEM number: 035548
CHF 11.90
swiing® revival piston 38 mm 1.6 hp | Puch
Manufacturer: swiing® revival parts · Nominal diameter: 38 mm · Ø outside piston (A): 37.96 mm · Compression height (C): 22.6 mm · Curvature (D): 2.5 mm · Total piston height (E): 50.45 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Piston weight: 74 g
CHF 44.90
Moped fans like you also bought:
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Surface: sandblasted · Material: Aluminum · Ø cylinder: 38 mm · Area of application: Standard · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No
CHF 32.90
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Area of application: Gearbox lubrication with clutch · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Pony OEM number: A2080 · Sachs OEM number: 0263 014 002
CHF 9.90
CHF 22.00/l
Hot 
Exhaust 22 mm 2-piece replica (with number) | Puch
Manufacturer: Made in Portugal · Material: Steel · Color: Chrome · Surface: chrome-plated · Ø outside: 58 mm · Total length: 920 mm · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Flame tube attachment: Flange · Number of fixing points: 4 pcs
CHF 64.90
swiing® revival 12 mm carburetor (original) | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Mounting type: Plug connection clamped · Width: 50 mm · Carburetor type: SRE · Height: 108 mm · Total length: 65 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nominal diameter: 12 mm · Ø Internal connection: 20 mm · Nozzle size: 52 · Ø Inside entrance: 12 mm · Area of application: Standard · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Color: gray · Nozzle block: 2.15 · Camouflaged: No · Clamping screw torque (max.): 4 N/m
CHF 69.90
swiing® revival 12 mm intake manifold | Puch E50
Manufacturer: swiing® revival parts · Material: Aluminum · Area of application: Original · Ø inside: 12 mm · Total length: 45.5 mm · Ø External connection: 20 mm · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Height flange center hole: 43 mm · Mounting type: Screws · Total height: 53 mm · Camouflaged: No
CHF 34.90
swiing nozzle set M3.5 (50 - 60) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Total length: 6 mm · Material: Brass · Quantity: 11 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60
CHF 21.90
Collection only possible with online purchase and appointment.
