Special graphite exhaust gasket suitable for Alpa Chopper / Turbo / Bora cylinders, Malaguti Fifty mopeds with a Franco Morini engine, as well as Fantic Issimo & Yamaha Yamy mopeds with a Minarelli engine.
This special gasket is temperature-resistant up to 3000 °C. The material expands with heat and thus adapts to unevenness of up to 1.5 mm.
The gasket can only be fitted once, as it hardens after the expansion process.
Hole spacing: 38 mm
Ø inside: 24 mm
Thickness: 4 mm
A quality product made in Italy.
Details
| Manufacturer | Made in Italy |
| Place of use | Exhaust |
| Ø outlet inside | 24 mm |
| Thickness | 4 mm |
| Hole spacing inlet | 38 mm |
Suitable for the following models
| Fantic | |
| Malaguti | |
| Yamaha | |
| Franco Morini |
Accessories & related products
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Thickness: 3 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm · Area of application: Tuning
CHF 7.40
swiing® ingenious gasket outlet (18 - 22 mm) graphite
Manufacturer: swiing® ingenious parts · Place of use: Exhaust · Material: Graphite / Graphite · Area of application: Standard · Reinforced: No · Thickness: 3.4 mm · Ø outlet inside: 22.7 mm · Ø screw holder: 7.3 mm · Hole spacing outlet: 37.5 - 42.5 mm
CHF 6.90
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm · Nipple length: 5 mm
CHF 2.80
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 2200 mm · Area of application: Standard · Nipple length: 10 mm · Number of components: 1 pcs
CHF 2.40
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Total length: 6 mm · Thread length: 4 mm · Drive: Slot
CHF 2.00
NTN 6203 C3 Ball bearing 17/40/12
Stock number: 6203 · Inner ring width: 12 mm · Manufacturer: NTN · Bearing clearance: C3 · Bearing cage: "-" Sheet steel cage ball-guided · Groove ring: No · Material: Steel · Surface: blank · Ø outside: 40 mm · Bearing type: Deep groove ball bearing · Ø inside: 17 mm · Area of application: Standard · Width: 12 mm · Ball bearing closed: No
CHF 8.90
Collection only possible with online purchase and appointment.
