Cable-free contact breaker for contact ignition on all Piaggio Ciao, Si, Bravo and Boxer mopeds / mopeds.
Version 2.0: The height of the mounting brackets for the cables has been reduced to prevent the risk of the flywheel rubbing. In addition, production has been optimized to ensure that the contact surfaces meet perfectly.
Note: It is essential to apply a little breaker grease to the contact strip to minimize its excessive wear.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Original Piaggio spare part number: 103133
Details
| Manufacturer | GPO |
| Material | Steel |
| Cable available | No |
| Ø mounting hole | 5 mm |
| Ø axle | 5 mm |
| Number of fixing points | 1 pcs |
| Area of application | Standard, Original |
| Piaggio spare part no. | 103133 |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
swiing® revival condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Ø outside: 18 mm · Manufacturer: swiing® revival parts · Capacity: 0.28 µF · Area of application: Original · Area of application: Standard · Height: 26 mm · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø mounting hole: 4.4 mm · Piaggio spare part no.: 102939
CHF 11.90
Moderate Casual 
Flywheel puller | Piaggio Ciao, SI, Bravo, Boxer
Diameter: 12.9 mm · Thread type: MF17x1 (fine pitch thread) · Width across flats (trigger): 19 mm · Width across flats Screw: 18 mm · Manufacturer: Quenching · Pull-off depth inside: 68 mm · Total length: 36.5 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Surface: galvanized · Number of components: 2 pcs
CHF 11.90
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
CHF 8.50
CHF 9.90
EFFE Condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: EFFE · Capacity: 0.26 µF · Mounting type: Tab for screwing · Connection type: Cable for screwing · Height: 26 mm · Ø outside: 18 mm · Ø mounting hole: 4.4 mm · Area of application: Original · Area of application: Standard · Piaggio spare part no.: 102939
CHF 11.90
swiing® ingenious puller flywheel | Piaggio Ciao, SI, Bravo, Boxer
Diameter: 12 mm · Diameter: 24 mm · Thread type: MF12x1.5 (fine pitch thread) · Thread type: MF17x1 (fine pitch thread) · Width across flats (trigger): 10 mm · Width across flats (trigger): 18 mm · Width across flats Screw: 19 mm · Manufacturer: swiing® ingenious parts · Total length: 100 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Surface: blue galvanized · Number of components: 2 pcs
CHF 17.90
swiing® revival condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Ø outside: 18 mm · Manufacturer: swiing® revival parts · Capacity: 0.28 µF · Area of application: Original · Area of application: Standard · Height: 26 mm · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø mounting hole: 4.4 mm · Piaggio spare part no.: 102939
CHF 11.90
GPO Pulse coil | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Mounting type: Screws · Area of application: Standard · Number of fixing points: 2 pcs · Ø mounting hole: 4.6 mm · Tension: 6 V · Width: 23.8 mm · Height: 23.8 mm · Hole spacing: 50 mm · Total length: 80 mm · Ø Internal flywheel: 91 mm
CHF 24.70
Collection only possible with online purchase and appointment.
