Pole wheel puller suitable for all Piaggio mopeds such as Ciao, Si, Bravo and Boxer.
Very high-quality flywheel puller, which shows no signs of weakness on the threads even after countless applications.
Function:
- The small sleeve is screwed onto the shaft of the crankshaft. This serves to protect the crankshaft thread.
- The special tool with M17x1 thread is screwed onto the magnet wheel.
- Screw in the screw from the puller using a 17 mm fork wrench until the timing gear loosens.
Parts to overhaul your ignition can be found in the accessories section.
Exclusive product for the highest demands of the quality brand swiing®.
Details
| Width across flats (trigger) | 18 mm, 10 mm |
| Width across flats Screw | 19 mm |
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | blue galvanized, blackened |
| Diameter | 24 mm, 12 mm |
| Thread type | MF17x1 (fine pitch thread), MF12x1.5 (fine pitch thread) |
| Total length | 100 mm |
| Area of application | (Dis)assembly tool |
| Number of components | 2 pcs |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
GPO breaker without cable (version 2.0) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Ø axle: 5 mm · Material: Steel · Ø mounting hole: 5 mm · Cable available: No · Number of fixing points: 1 pcs · Area of application: Original · Area of application: Standard · Piaggio spare part no.: 103133
CHF 9.90
CHF 11.90
swiing® revival condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Ø outside: 18 mm · Manufacturer: swiing® revival parts · Capacity: 0.28 µF · Area of application: Original · Area of application: Standard · Height: 26 mm · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø mounting hole: 4.4 mm · Piaggio spare part no.: 102939
CHF 11.90
Moderate Casual 
Flywheel puller | Piaggio Ciao, SI, Bravo, Boxer
Diameter: 12.9 mm · Thread type: MF17x1 (fine pitch thread) · Width across flats (trigger): 19 mm · Width across flats Screw: 18 mm · Manufacturer: Quenching · Pull-off depth inside: 68 mm · Total length: 36.5 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Surface: galvanized · Number of components: 2 pcs
CHF 11.90
GPO stator electronic ignition with light (three outputs) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Tension: 12 V · Performance: 90 W · Number of cables: 6 pcs · Cable length: 100 mm · Cable length: 400 mm · Ø inside: 29.5 mm · Ø outside: 105 mm · Number of fixing points: 3 pcs · Hole spacing: 34.5 mm · Piaggio spare part no.: 219965
CHF 99.90
GPO flywheel 800 g full cheek shaft electronic ignition | Piaggio Ciao, SI, Bravo, Boxer
Material: Aluminum · Manufacturer: GPO · Thread type: MF17x1 (fine pitch thread) · Direction of rotation: right · Ø Internal flywheel: 106 mm · Ø Flywheel outside: 139.5 mm · Weight: 800 g · Alternative version of Piaggio spare part no.: 181103 · Alternative version of Piaggio spare part no.: 2238183
CHF 134.30
swiing® ingenious screw M12x1.25 x 51 hexagonal ball end & cap
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Area of application: Special tool · Area of application: Workshop accessories · Thread type: MF12x1.25 (fine pitch thread) · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 19 mm · Thread length: 42 mm · Number of components: 1 pcs
CHF 8.90
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
CHF 8.50
CHF 9.90
swiing nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA (type 3) · Carburetor type: SHA (type 4) · Nozzle type: Main nozzle · Nozzle thread: M5 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Total length: 8 mm · Drive: Slot
CHF 20.90
EFFE Condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: EFFE · Capacity: 0.26 µF · Mounting type: Tab for screwing · Connection type: Cable for screwing · Height: 26 mm · Ø outside: 18 mm · Ø mounting hole: 4.4 mm · Area of application: Original · Area of application: Standard · Piaggio spare part no.: 102939
CHF 11.90
swiing® revival condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Ø outside: 18 mm · Manufacturer: swiing® revival parts · Capacity: 0.28 µF · Area of application: Original · Area of application: Standard · Height: 26 mm · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø mounting hole: 4.4 mm · Piaggio spare part no.: 102939
CHF 11.90
Collection only possible with online purchase and appointment.
