Cylinder base gasket for the blower-cooled BADASS Lucifer and GPO Sombrero 41 mm cylinder kit, suitable for your Puch X30 Velux and with adaptations to your Puch X30 NG-2AH moped / moped.
This cylinder gasket (cylinder flange gasket) is a perfect fit and of the highest quality.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
Nominal diameter | 45 mm |
Manufacturer | GPO |
Material | Oiled paper |
Ø inside | 45 mm |
Place of use | Cylinder base |
Thickness | 0.5 mm |
Hole pattern [mm] | 44 x 44 |
Suitable for the following models
Puch | ZA50 (Gebläsegekühlt) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
Accessories & related products
Gasket outlet Ø 27 mm large
Manufacturer: Made in Italy · Place of use: Outlet · Material: Sealing carton · Material: Sheet metal (steel) · Thickness: 2 mm · Number of fixing points: 2 pcs · Ø mounting hole: 6.9 mm · Ø inside: 26.3 mm · Hole spacing: 42 mm · Ø outside: 44 mm · Hole spacing (max.): 56.8 mm
CHF 2.70
Not in stock
swiing® revival Set stud bolts M6x30 (strength 10.9) galvanized
Manufacturer: swiing® revival parts · Thread type: M6x1 (standard thread) · Material: Steel · Surface: blue galvanized · Diameter: 6 mm · Drive: External hexagon · Total length: 30 mm · Width across flats SW: 10 mm · Strength class: 8 · Strength class: 10.9 · Thread length: 12 mm
CHF 10.60
BAD ASS Lucifer cylinder Ø 41 mm | Puch X30 Velux, NG-2AH
Nominal diameter: 41 mm · Manufacturer: BAD ASS · Material: Gray cast iron · Surface: sandblasted · Ø cylinder neck: 44.9 mm · Ø outlet inside: 25 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No · Area of application: Tuning
CHF 209.90
CHF 237.40
GOL piston 41 mm BAD ASS Lucifer | Puch X30 Velux, NG-2AH
Manufacturer: BAD ASS · Nominal diameter: 41 mm · Ø outside piston (A): 40.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.4 mm · Curvature (D): 2.4 mm · Total piston height (E): 48.3 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS)
CHF 69.90
Moped fans like you also bought:
swiing® revival shim set crankshaft L17 | Puch Z50
Ø inside: 17.1 mm · Nominal diameter: 17 mm · Ø outside: 23.8 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.25 mm · Thickness: 0.3 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled
CHF 8.90
swiing® revival Set stud bolts M6x30 (strength 10.9) galvanized
Manufacturer: swiing® revival parts · Thread type: M6x1 (standard thread) · Material: Steel · Surface: blue galvanized · Diameter: 6 mm · Drive: External hexagon · Total length: 30 mm · Width across flats SW: 10 mm · Strength class: 8 · Strength class: 10.9 · Thread length: 12 mm
CHF 10.60
BAD ASS Lucifer cylinder Ø 41 mm | Puch X30 Velux, NG-2AH
Nominal diameter: 41 mm · Manufacturer: BAD ASS · Material: Gray cast iron · Surface: sandblasted · Ø cylinder neck: 44.9 mm · Ø outlet inside: 25 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No · Area of application: Tuning
CHF 209.90
CHF 237.40