Complete oil seal set for the gearbox, crankshaft and clutch bell housing of all Piaggio Ciao, SI, Bravo, Boxer mopeds / mopeds with mono drive.
Gearbox input shaft (pully):
- Ø inner: 17 mm
- Ø outer: 25 mm
- Width: 4 mm
- Material: NBR
- Temperature resistant: -30 to +100 °C, briefly up to 120 °C
- Type: A - With rubberized outer jacket and a sealing lip.
Gearbox output shaft:
- Ø inner: 20 mm
- Ø outer: 30 mm
- Width: 5 mm
- Material: NBR
- Temperature resistant: -30 to +100 °C, briefly up to 120 °C
- Type: A - With rubberized outer jacket and a sealing lip.
Crankshaft:
- Ø inner: 15 mm
- Ø outer: 24 mm
- Width: 5 mm
- Material: NBR
- Temperature resistant: -30 to +100 °C, briefly up to 120 °C
- Type: A - With rubberized outer jacket and a sealing lip.
Coupling bell:
- Ø inner: 16 mm
- Ø outer: 22 mm
- Width: 3 mm
- Material: NBR
- Temperature resistant: -30 to +100 °C, briefly up to 120 °C
- Type: B - With sheet metal outer casing and a sealing lip.
Note: If you are using a very old splined gearbox from the first Piaggio models, you will need an oil seal with the dimensions 22/35/6 mm for the output shaft.
You can find other seal sets and individual oil seals in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
| Simmering type | A - With rubberized outer part / one sealing lip., B - With sheet metal outer casing / one sealing lip. |
| Ø inside | 17 mm, 20 mm, 15 mm, 16 mm |
| Ø outside | 25 mm, 30 mm, 24 mm, 22 mm |
| Manufacturer | GPO |
| Width | 4 mm, 5 mm, 3 mm |
| Material | NBR |
| Area of application | Standard, Original |
| Place of use | Gearbox cover, Gear hub, Crankshaft, Clutch |
| Temperature resistance (min.) | -30 - 120 °C |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
Oil seal NBR 16/22/3 B clutch original | Piaggio Ciao, SI, Bravo
Simmering type: B - With sheet metal outer casing / one sealing lip. · Ø inside: 16 mm · Ø outside: 22 mm · Manufacturer: Piaggio · Width: 3 mm · Material: NBR · Place of use: Clutch · Temperature resistance (min.): -30 - 100 °C · Piaggio spare part no.: 124571
CHF 2.90
Oil seal NBR 17/25/4 A Gearbox Mono original | Piaggio Ciao, SI, Bravo, Boxer
Simmering type: A - With rubberized outer part / one sealing lip. · Ø inside: 17 mm · Ø outside: 25 mm · Manufacturer: Piaggio · Width: 4 mm · Material: NBR · Surface: rubberized · Temperature resistance (min.): -30 - 100 °C
CHF 5.90
Oil seal NBR 20/30/5 A gearbox original | Piaggio Ciao, SI, Bravo, Boxer
Simmering type: A - With rubberized outer part / one sealing lip. · Ø inside: 20 mm · Ø outside: 30 mm · Manufacturer: Piaggio · Width: 5 mm · Material: NBR · Surface: rubberized · Temperature resistance (min.): -30 - 100 °C
CHF 5.90
Moped fans like you also bought:
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Valve type: TR4 Auto valve · Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 " · Tire width [mm]: 50.8 - 63.5 · Tire height [%]: 100 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5
CHF 9.90
GPO control bearing set | Piaggio Ciao
Bearing type: Bearing ring · Ø inside: 27 mm · Ø outside: 41.4 mm · Ø outside: 42 mm · Manufacturer: GPO · Height: 10.5 mm · Height: 17 mm · Material: Steel · Surface: blue galvanized · Color: silver · Thread type: FG25.4 (1" 24G) · Ø mounting frame: 30.05 mm · Ø ball [inch] / [mm]: 5/32" (4.00 mm)
CHF 18.90
Collection only possible with online purchase and appointment.
