New
Hot 
High-quality 6V current limiter with large cooling element for your moped, moped and small motorcycle.
The specially developed electronics inside the GPO regulator are optimally designed for electronic ignitions that generate high voltage peaks. In various load tests, other limiters showed significant weaknesses in direct comparison with the GPO regulator, as they were often no longer able to regulate the voltage reliably after a short time. The GPO voltage limiter, on the other hand, was consistently convincing. The highest measured voltage peak was only 8.5 V, which is absolutely within the normal range for 6-volt devices.
Details
| Manufacturer | GPO |
| Material | Aluminum |
| Tension | 6 V |
| Type of current | Alternating current (AC) |
| Total length | 58 mm |
| Width | 36 mm |
| Height | 23 mm |
| Mounting type | Nuts & bolts |
| Ø mounting hole | 6.2 mm |
Accessories & related products
6V bulb set (P26s) with GPO voltage regulator | Puch
Manufacturer: GPO · Manufacturer: swiing® revival parts · Test mark: none · Bulb holder: BA9s · Bulb holder: P26s · Tension: 6 V · Performance: 3 W · Performance: 4 W · Performance: 15 W · Performance: 20 W · Color: white · Ø base: 9 mm · Ø base: 26 mm · Total length: 23 mm · Total length: 44 mm · Ø Lamp head: 9 mm · Ø Lamp head: 25 mm · LED: No
CHF 27.90
6V bulb set (BAX15d) with GPO voltage regulator | Puch
Manufacturer: GPO · Manufacturer: swiing® revival parts · Test mark: none · Bulb holder: BA9s · Bulb holder: BAX15d · Tension: 6 V · Performance: 3 W · Performance: 4 W · Performance: 15 W · Performance: 25 W · Color: white · Ø base: 9 mm · Ø base: 15 mm · Ø Lamp head: 9 mm · Ø Lamp head: 28 mm · LED: No
CHF 29.90
6V bulb set with GPO voltage regulator | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Manufacturer: swiing® revival parts · Test mark: none · Bulb holder: BA9s · Bulb holder: E10 · Bulb holder: P26s · Tension: 6 V · Performance: 3 W · Performance: 4 W · Performance: 6 W · Performance: 15 W · Performance: 20 W · Color: white · Total length: 23 mm · Total length: 24 mm · Total length: 44 mm · Ø base: 9 mm · Ø base: 9.5 mm · Ø base: 26 mm · Ø Lamp head: 9 mm · Ø Lamp head: 11 mm · Ø Lamp head: 25 mm · LED: No
CHF 32.90
Moped fans like you also bought:
GPO license plate holder Inox
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Color: silver · Total length: 145 mm · Number of fixing points: 2 pcs · Hole spacing: 30 mm · Hole spacing: 50 mm · Width: 105 mm · Thread length: 8 mm · Mounting type: Nuts & bolts · Height: 5.3 mm · Ø mounting hole: 5 mm · Thread type: M5x0.8 (standard thread)
CHF 9.50
CHF 10.90
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Reserve level: 70 mm · Thread type: MF12x1 (fine pitch thread)
CHF 9.90
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Drive: Slot · Ø Cable bushing: 1.6 mm · Total length: 6 mm · Screw head: Lens head · Thread length: 4 mm · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread)
CHF 2.00
Transval speedo drive 17" with 12 mm axle | Puch Maxi S, N, X30 NS, NL, N-2AH, Velux
Place of use: left · Place of use: right · Manufacturer: Transval · Material: Aluminum · Color: gray · Thread type: MF10x1 (fine pitch thread) · Wheel size [inch]: 17 " · 4-edge speedometer cable: 2.6 mm · Ø outside: 41 mm · Ø mounting hole: 12.2 mm · Ø axle: 12 mm · Overall width outside: 60 mm · Total height: 60 mm
CHF 35.90
Collection only possible with online purchase and appointment.
