White 6 - 24V LED light with 2-pin bayonet mount for headlights on various mopeds, mopeds and small motorcycles. The BAX15d bulb is ideal for use in front lights with high beam and low beam.
Thanks to the voltage range of 6 to 24 volts, the LED bulb can be operated with both 6 volt contact ignitions and 12 volt electronic ignitions.
The short design means that the LED bulb fits into any headlight without protruding from the front of the glass. The LED bulb is equipped with a total of twelve diodes, four of which are aligned to the front and the remaining eight to the side.
The output is 2.4 LED watts, which according to the rule of thumb conversion corresponds to around 15 bulb watts. The color temperature is specified by the manufacturer as 6000 K (Kelvin) and the brightness as 600 Lm (lumen).
Note: Despite the maximum voltage of 24 volts of the LED light source, the installation of a 12 V voltage regulator is essential for electronic ignitions, as higher voltage peaks can occur depending on the ignition.
You can find the right voltage limiter in addition to other bulbs and bulbs in the accessories section.
Details
Test mark | none |
Bulb holder | BAX15d |
Tension | 6 V, 12 V, 24 V |
Color | white |
Total length | 45 mm |
Ø base | 15 mm |
Ø Lamp head | 18 mm |
LED | Yes |
Accessories & related products
12V LED set (BAX15d) with Leonelli voltage regulator | Puch
Manufacturer: Leonelli · Bulb holder: BA9s · Bulb holder: BAX15d · Color: red · Color: white · Tension: 12 V · Total length: 22 mm · Total length: 45 mm · Ø base: 9 mm · Ø base: 15 mm · Test mark: none · Ø Lamp head: 9.5 mm · Ø Lamp head: 18 mm · LED: Yes
CHF 52.90
6V LED set (BAX15d) with Leonelli voltage regulator | Puch
Manufacturer: Leonelli · Bulb holder: BA9s · Bulb holder: BAX15d · Color: red · Color: white · Tension: 6 V · Total length: 22 mm · Total length: 45 mm · Ø base: 9 mm · Ø base: 15 mm · Test mark: none · Ø Lamp head: 9.5 mm · Ø Lamp head: 18 mm · LED: Yes
CHF 49.90
Moped fans like you also bought:
Spotlight round Ø 13 cm chrome / black
Material: Sheet metal (steel) · Test mark: none · Housing material: Metal · Surface: chrome-plated · Surface: varnished · Ø outside: 130 mm · Lens material: Plastic · Width: 134 mm · Height: 147 mm · Color: Chrome · Color: black · Color: transparent · Bulb holder: BA15d · Depth: 80 mm · Speedometer recording: None · Thread size: M6 · Switch included: No · Battery operated: No · Mounting type: Screws · Area of application: Standard · Number of fixing points: 2 pcs
CHF 24.90
12V LED set (BAX15d) with Leonelli voltage regulator | Puch
Manufacturer: Leonelli · Bulb holder: BA9s · Bulb holder: BAX15d · Color: red · Color: white · Tension: 12 V · Total length: 22 mm · Total length: 45 mm · Ø base: 9 mm · Ø base: 15 mm · Test mark: none · Ø Lamp head: 9.5 mm · Ø Lamp head: 18 mm · LED: Yes
CHF 52.90
6V LED set (BAX15d) with Leonelli voltage regulator | Puch
Manufacturer: Leonelli · Bulb holder: BA9s · Bulb holder: BAX15d · Color: red · Color: white · Tension: 6 V · Total length: 22 mm · Total length: 45 mm · Ø base: 9 mm · Ø base: 15 mm · Test mark: none · Ø Lamp head: 9.5 mm · Ø Lamp head: 18 mm · LED: Yes
CHF 49.90