Completely reworked 12V HPI ignition with built-in 60W light coil, for use with breaker ignition, suitable for your Piaggio Ciao, Si, Bravo and Boxer moped / moped.
Advantages of the HPI ignition:
- always a constant, strong spark
- better acceleration due to small and light rotor (364 g)
- lightweight aluminum flywheel (200 g)
- better throttle response
- no more misfires
- ;
- one adjustment and never again
- little to no wear
- less temperature sensitivity
The ignition can be optionally supplemented with the programmable HPI CDI box for two ignition curves and the HPI switch. This allows you to switch between two pre-installed ignition curves.
Only for experienced mechanics:
This high-end ignition does not fit in housings designed for electronic ignition. Before installing the new earthing, the two mounting points of the impulse coil must be removed by 3 mm (see Figure 3) to create a flat surface with the other support points for the base plate. After this, it is no longer possible to mount the coil on a contact ignition.
Further adjustment work must also be expected, including on the fan wheel.
If the light coil is used, a 12V voltage regulator must be used.
With two pieces of approx. 80 mm long M6 screws, you can use the clutch puller for Puch (item 10086) to remove the flywheel again.
Further parts such as the programmable HPI CDI box or the matching HPI switch can be found in the accessories.
Branded product from the manufacturer HPI – Horse Power Ignition.
Details
| Manufacturer | HPI |
| Ø Internal flywheel | 61.5 mm |
| Light coil voltage | 12 V |
| Ø cable | 7 mm |
| Area of application | Tuning |
| Performance | 60 W |
| Direction of rotation | right |
| Ø mounting plate | 90 mm |
| Ø Flywheel outside | 140 mm |
| Mounting type | Screws |
| Number of fixing points | 4 pcs |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Color: silver · Resistance: 1000 Ω · Pony OEM number: A2099 · Sachs OEM number: 0265 100 00
CHF 8.75
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 12 V · Surface: galvanized (blue) · Performance: 100 W · Type of current: Alternating current (AC) · Mounting type: Screws · Ø mounting hole: 6 mm · Total length: 50 mm · Width: 27 mm · Height: 15 mm
CHF 34.90
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
swiing® ingenious 280 g additional weight HPI Inox
Ø inside: 39 mm · Ø outside: 95 mm · Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Surface: blank · Number of fixing points: 7 pcs · Thickness: 12.5 mm · Ø bolt circle: 50 mm · Ø bolt circle: 55 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 10 mm · Weight: 300 g
CHF 49.90
HPI racing ignition 12V with light elect. Housing | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: HPI · Ø Internal flywheel: 61.5 mm · Area of application: Racing · Area of application: Tuning · Ø cable: 7 mm · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: right · Ø Flywheel outside: 140 mm · Mounting type: Screws
CHF 349.90
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Thread type: MF12x1 (fine pitch thread)
CHF 9.90
Hot
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 12 V · Surface: galvanized (blue) · Performance: 100 W · Type of current: Alternating current (AC) · Mounting type: Screws · Ø mounting hole: 6 mm · Total length: 50 mm · Width: 27 mm · Height: 15 mm
CHF 34.90
Collection only possible with online purchase and appointment.
