Complete 12V HPI ignition with built-in 60W light coil, for housings with electronic ignition, suitable for your Piaggio Ciao, Si, Bravo and Boxer moped / moped.
Advantages of the HPI ignition:
- always a constant, strong spark
- better acceleration due to small and light rotor (364 g)
- Lightweight aluminum flywheel (200 g)
- better throttle response
- no more false ignitions
- adjust once and never again
- Little to no wear and tear
- less sensitivity to temperature
The ignition can optionally be supplemented with the programmable HPI CDI box for two ignition curves and the HPI switch. This allows you to switch between two pre-installed ignition curves.
Details
| Ø cable | 7 mm |
| Manufacturer | HPI |
| Light coil voltage | 12 V |
| Performance | 60 W |
| Direction of rotation | right |
| Ø Internal flywheel | 61.5 mm |
| Ø Flywheel outside | 140 mm |
| Mounting type | Screws |
| Area of application | Tuning, Racing |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
BERU spark plug connector / 1 kΩ interference suppressed
Ø cable: 5 mm · Ø cable: 7 mm · Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Color: silver · Suppressed: Yes · Resistance: 1000 Ω · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
CHF 8.75
Hot 
Leonelli 12V voltage regulator (1A quality)
Width: 27 mm · Height: 15 mm · Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 12 V · Performance: 100 W · Type of current: Alternating current (AC) · Ø mounting hole: 6 mm · Mounting type: Screws · Total length: 50 mm
CHF 34.90
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Contents [ml]: 10 ml · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
HPI racing ignition 12V with light breaker housing | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: HPI · Light coil voltage: 12 V · Direction of rotation: right · Performance: 60 W · Ø mounting plate: 90 mm · Mounting type: Screws · Ø Flywheel outside: 140 mm · Area of application: Tuning · Ø cable: 7 mm · Ø Internal flywheel: 61.5 mm · Number of fixing points: 4 pcs
CHF 349.90
swiing® ingenious 280 g additional weight HPI Inox
Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: blank · Ø outside: 95 mm · Ø inside: 39 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Thickness: 12.5 mm · Weight: 300 g · Number of fixing points: 7 pcs · Ø bolt circle: 50 mm · Ø bolt circle: 55 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 10 mm
CHF 49.90
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Reserve level: 70 mm
CHF 9.90
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Surface: blank · Ø outside: 45 mm · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Ø inside: 41 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
CHF 2.80
swiing® revival gearbox cover gasket | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1888)
Width: 130 mm · Manufacturer: swiing® revival parts · Total length: 200 mm · Thickness: 0.35 mm · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Number of fixing points: 6 pcs · Pony OEM number: A1888 · Sachs OEM no.: 0250 150 000
CHF 5.40
GPO blade gauge set 0.05 - 1.00 mm 20 pcs.
Measuring range [mm]: 0.05 - 1 mm · Manufacturer: GPO · Area of application: Measuring tool · Material: Steel · Number of components: 20 pcs · Thickness: 0.05 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.25 mm · Thickness: 0.3 mm · Thickness: 0.35 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Thickness: 0.5 mm · Thickness: 0.55 mm · Thickness: 0.65 mm · Thickness: 0.7 mm · Thickness: 0.75 mm · Thickness: 0.8 mm · Thickness: 0.85 mm · Thickness: 0.9 mm · Thickness: 0.95 mm · Thickness: 1 mm
CHF 14.90
Collection only possible with online purchase and appointment.
