Black, adjustable dampers for your moped, moped and small motorcycle.
The hardness or preload of the coil springs can be adjusted using the special spring mount.
Length (mount - mount): 280 mm
Ø outer spiral spring: 45 mm
Ø spars: 28 mm
Büchsendurchmesser zur Bef.: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found under accessories.
Quality product from the Italian manufacturer IMCA.
Details
| Manufacturer | IMCA |
| Material | Steel |
| Surface | varnished |
| Color | black |
| Damping type | Spring |
| Adjustable | Yes |
| Total length | 280 mm |
| Mounting type | Nuts & bolts |
| Ø spars | 28 mm |
| Ø outside | 45 mm |
| Number of fixing points | 2 pcs |
| Ø Fastening inside | 10 mm |
Suitable for the following models
| Universal | |
| Tomos |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Contents [ml]: 10 ml · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
Moped fans like you also bought:
Not so nice 
Main stand black (budget) | Puch Maxi S, P1 / X30 NS, NL, NG
Material: Steel · Color: black · Surface: varnished · Stand base - center mount (A): 207 mm · Total width of stand base (B): 217 mm · Wide receptacle (C): 66 mm · Ø Receptacle (D): 18 mm · Spring nipple distance - center pivot axis (E): 75 mm · Wide upright foot (F): 20 mm · Wide upright foot (F): 50 mm · Total height: 220 mm
CHF 19.90
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Material: Polyvinyl chloride (PVC-U_hard) · Place of use: Frame (+ tank) · Color: black · Color: white · Height: 26 mm · Height: 60 mm · Height: 65 mm · Consistency: UV-resistant · Consistency: petrol resistant · Rear side texture: Adhesive · Width: 123 mm · Width: 230 mm · Width: 330 mm
CHF 9.40
swiing® revival side protection screw set black | Puch Maxi S
Total length: 47 mm · Total length: 60 mm · Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Thread type: M5x0.8 (standard thread) · Color: silver · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm
CHF 12.90
Collection only possible with online purchase and appointment.
