Black, adjustable shock absorbers for your moped, moped and small motorcycle.
The hardness or preload of the shock absorbers can be adjusted using the special spring mount.
Length (mount - mount): 320 mm
Ø outer coil spring: 44 mm
Ø spars: 28 mm
Ø bushings for fastening: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushings from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Quality product from the Italian manufacturer IMCA.
Details
| Manufacturer | IMCA |
| Material | Steel |
| Surface | varnished |
| Color | black |
| Damping type | Spring |
| Adjustable | Yes |
| Mounting type | Nuts & bolts |
| Ø spars | 28 mm |
| Ø outside | 44 mm |
| Total length | 320 mm |
| Number of fixing points | 2 pcs |
| Ø Fastening inside | 10 mm |
Accessories & related products
IMCA shock absorber 30 cm chrome
Total length: 300 mm · Manufacturer: IMCA · Color: Chrome · Material: Steel · Surface: chrome-plated · Damping type: Spring · Adjustable: Yes · Ø spars: 28 mm · Ø outside: 45 mm · Ø Fastening inside: 10 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
CHF 50.90
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Contents [ml]: 10 ml · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Surface: varnished · Color: black · Damping type: Hydraulic (oil) · Mounting type: Nuts & bolts · Adjustable: Yes · Ø spars: 32 mm · Ø outside: 52 mm · Total length: 330 mm · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm
CHF 139.90
IMCA shock absorber 30 cm chrome / black
Manufacturer: IMCA · Material: Steel · Surface: chrome-plated · Surface: varnished · Color: Chrome · Color: black · Mounting type: Nuts & bolts · Damping type: Spring · Adjustable: Yes · Ø spars: 28 mm · Ø outside: 45 mm · Total length: 300 mm · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm
CHF 59.90
Moped fans like you also bought:
Not so nice 
Chrome luggage rack | Puch Maxi S
Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Nuts & bolts · Wheel size [inch]: 17 " · Width: 168 mm · Total length: 425 mm · Ø mounting hole: 8.3 mm · Ø mounting hole: 9 mm · Height: 32.5 mm · Number of fixing points: 4 pcs · Hole spacing: 29 mm
CHF 19.90
Spotlight round Ø 13 cm chrome / black
Material: Sheet metal (steel) · Test mark: none · Surface: chrome-plated · Surface: varnished · Housing material: Metal · Bulb holder: BA15d · Lens material: Plastic · Width: 134 mm · Color: Chrome · Color: black · Color: transparent · Height: 147 mm · Ø outside: 130 mm · Speedometer recording: None · Switch included: No · Battery operated: No · Depth: 80 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Thread size: M6 · Area of application: Standard
CHF 24.90
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Thread type: MF12x1 (fine pitch thread) · Mounting type: Union nut · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
CHF 9.90
swiing® revival side protection screw set black | Puch Maxi S
Total length: 47 mm · Total length: 60 mm · Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Thread type: M5x0.8 (standard thread) · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm
CHF 12.90
Collection only possible with online purchase and appointment.
