3 clutch springs suitable for the *Jammer* racing clutch for Puch E50 engines.
The springs are available in 3 strengths. This is the lightest version.
Thickness: 1.5 mm
Quality product from the American manufacturer Jammer Clutches.
Details
| Spring design | Tension spring |
| Ø wire | 1.5 mm |
| Manufacturer | Jammer |
| Material | Spring steel |
| Area of application | Tuning |
Suitable for the following models
| Puch | E50 |
Accessories & related products
- 24 %
Hot 
Jammer racing clutch special 65 ccm and more | Puch E50
Manufacturer: Jammer · Material: Steel · Material addition: Steel · Surface: blue galvanized · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Ø outside: 92.5 mm · Thickness: 19 mm · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
CHF 189.90
CHF 249.90
Jammer clutch 1st gear | Tomos A35, A55
Manufacturer: Jammer · Material: Steel · Material addition: Aluminum · Recording type: Interlocking · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Tomos spare part no.: 227849
CHF 191.90
Malossi replacement clutch springs Jammer clutch | Puch, Tomos
Manufacturer: Malossi · Material: Spring steel · Spring design: Tension spring · Area of application: Tuning · Color: red · Surface: varnished · Color: white · Color: yellow · Ø wire: 2.2 mm · Ø wire: 2.3 mm · Ø wire: 2.4 mm · Total length: 32.6 mm
CHF 29.90
Moped fans like you also bought:
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Nominal diameter: 44 mm · Manufacturer: Airsal · Material: Cast aluminum · Surface: sandblasted · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 24 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Camouflaged: Yes · Area of application: Tuning
CHF 84.90
CHF 114.90
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Material: Sealing paper · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Ø inside: 41 mm · Ø outside: 45 mm · Pony spare part no.: A4519 · Sachs spare part no.: 0950 128 000
CHF 2.80
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Bearing type: Plain bearing · Manufacturer: swiing® revival parts · Material: Nylon · Surface: blank · Color: black · Ø inside: 16.2 mm · Ø outside: 20.2 mm · Total length: 19 mm · Ø Bundle: 24.1 mm · Puch spare part no.: 349.1.42.005.1
CHF 2.50
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
CHF 9.90
CHF 22.00/l
Speedometer 60 km/h Ø 48 mm (black dial)
Manufacturer: Made in Germany · Material: Metal · Material: Plastic · Surface: chrome-plated · Color: Chrome · Color: black · Color: red · Color: white · Maximum speed: 60 Km/h · Lighting: Light slit · 4-edge speedometer cable: 2 mm · Thread type: MF10x1 (fine pitch thread) · Ø Receptacle: 48 mm · Ø outside: 50.4 mm · Depth: 50 mm · Total height: 70 mm
CHF 59.90
Gasket cylinder base Sachs 50/2 & 503 (1 mm)
Material: Sealing carton · Place of use: Cylinder base · Thickness: 1 mm · Hole pattern [mm]: 60 x 40 · Area of application: Standard · Alternative version of the Pony Spare part no.: A1848 · Alternative version of Sachs spare part no.: 0250 113 100
CHF 4.70
Collection only possible with online purchase and appointment.
