Crankshaft suitable for all Piaggio Ciao, Si, Bravo and Boxer mopeds / mopeds.
This finely balanced crankshaft fits all cylinders with 12 mm piston pin.
For assembly, a 16 x 0.5 mm shim must be inserted between the standard crankshaft and its main bearings.5 mm shim must be inserted between the standard crankshaft and its main bearings.
Attention: The crankpin is 1 mm shorter than on the original crankshaft, so the camshaft end must be removed by 1 mm to ensure that the flywheel sits correctly on the cone. Alternatively, you can also use the already machined cam from the accessories.
Original Piaggio spare part number: 1841545
Branded product of the Portuguese manufacturer Jasil under the Top Racing brand.
Details
| Dimension needle bearing | 12 / 15 x 14.7 mm (axe 12) |
| Manufacturer | Jasil |
| Cheek type | standard |
| Crankshaft stroke | 43 mm |
| Ø coupling pin / vario pin | 12 mm |
| Connecting rod length center-center | 87 mm |
| Thread type | M8x1.25 (standard thread) |
| Total length crankpin ignition side | 91.5 mm |
| Ø piston pin (B) | 12 mm |
| Ø Connecting rod eye | 15 mm |
| Area of application | Standard |
| Ø Bearing seat (clutch side) | 15 mm |
| Ø Bearing seat (ignition side) | 15 mm |
| Wide crank webs | 33 mm |
| Length 1st paragraph | 21.5 mm |
| Length 2nd paragraph | 43.5 mm |
| Length 3rd paragraph | 64 mm |
| Number of gears | 1 pcs |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
swiing® ingenious needle roller bearing 12/15/16.2 "Racing" silver cage
Bearing cage: Silver cage · Manufacturer: swiing® ingenious parts · Ø inside: 12 mm · Bearing type: Needle roller and cage assembly · Ø outside: 15 mm · Dimension needle bearing: 12/15 x 16.2 · Width: 16.2 mm · Tomos OEM number: 035548
CHF 13.90
swiing® ingenious puller flywheel | Piaggio Ciao, SI, Bravo, Boxer
Width across flats (trigger): 10 mm · Width across flats (trigger): 18 mm · Manufacturer: swiing® ingenious parts · Width across flats Screw: 19 mm · Material: Steel · Surface: blackened · Surface: galvanized (blue) · Diameter: 12 mm · Diameter: 24 mm · Thread type: MF12x1.5 (fine pitch thread) · Thread type: MF17x1 (fine pitch thread) · Total length: 100 mm · Area of application: (Dis)assembly tool · Number of components: 2 pcs
CHF 17.90
Moped fans like you also bought:
Malossi 43 mm cylinder kit 12 mm KoBo new version | Piaggio Ciao, SI, Boxer, Bravo
Manufacturer: Malossi · Material: Gray cast iron · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 63 ccm · Ø cylinder neck: 45.6 mm · Ø Outlet outside: 22.4 mm · Nominal diameter: 43 mm · Ø piston pin (B): 12 mm · Area of application: Tuning · Number of fixing points: 3 pcs · Ø outlet inside: 18.3 mm · Outlet type: clamped · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No
CHF 144.90
SKF 6202 C3 ball bearing 15/35/11
Bearing type: Deep groove ball bearing · Width: 11 mm · Stock number: 6202 · Inner ring width: 11 mm · Manufacturer: SKF · Bearing clearance: C3 · Bearing cage: "-" Sheet steel cage ball-guided · Ø outside: 35 mm · Ø inside: 15 mm · Puch OEM number: 900.4.6202
CHF 9.90
Collection only possible with online purchase and appointment.
