Not so nice 
Light coil, more or less suitable for Piaggio Ciao, Si, Bravo and Boxer mopeds / mopeds with breaker ignition.
The coil is cleanly manufactured and does its job as it should, but unfortunately the cable is a little too short and should be about 115 - 120 mm long instead of 105.
You can try to mount the coil differently, lengthen the cable or simply use a high-quality product from the accessories section.
Ø Mounting hole: 4.4 mm
Hole spacing: 50 mm
Cable length with plug: 105 mm
Mäsig-läsig! – We strive to offer you the widest range of moped spare parts. However, this product is of rather poor quality and is not recommended by us. Should you nevertheless choose this item, we understand, but cannot offer you any guarantee or exchange.
High-quality alternatives and other parts for contact tracing can be found in the accessories section.
Details
| Ø mounting hole | 4.4 mm |
| Total length | 105 mm |
| Hole spacing | 50 mm |
| Mounting type | Screws |
| Number of fixing points | 2 pcs |
Suitable for the following models
| Piaggio | Ciao Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
GPO breaker without cable (version 2.0) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Material: Steel · Ø axle: 5 mm · Ø mounting hole: 5 mm · Cable available: No · Number of fixing points: 1 pcs · Area of application: Original · Area of application: Standard · Piaggio OEM number: 103133
CHF 9.90
swiing® revival condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Capacity: 0.28 µF · Ø outside: 18 mm · Height: 26 mm · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø mounting hole: 4.4 mm · Area of application: Original · Area of application: Standard · Piaggio OEM number: 102939
CHF 11.90
Not so nice
Flywheel breaker ignition incl. coils | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Quenching · Material: Aluminum · Material: Steel · Tension: 6 V · Direction of rotation: right · Ø Internal flywheel: 92 mm · Ø Flywheel outside: 141 mm · Weight: 1300 g · Area of application: Standard
CHF 99.90
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Reserve level: 70 mm
CHF 9.90
Fuel tap vertical M12x1 (with union nut) outgoing right | Piaggio SI
Manufacturer: Made in Italy · Possible lever positions: open / closed / reserve · Material lever: Plastic · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: vertical / vertical · Outlet direction: right · Spare tube shape: straight · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Reserve level: 65 mm
CHF 12.40
EFFE Condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: EFFE · Capacity: 0.26 µF · Ø outside: 18 mm · Height: 26 mm · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø mounting hole: 4.4 mm · Area of application: Original · Area of application: Standard · Piaggio OEM number: 102939
CHF 11.90
swiing® revival condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Capacity: 0.28 µF · Ø outside: 18 mm · Height: 26 mm · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø mounting hole: 4.4 mm · Area of application: Original · Area of application: Standard · Piaggio OEM number: 102939
CHF 11.90
GPO Pulse coil | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Tension: 6 V · Ø Internal flywheel: 91 mm · Total length: 80 mm · Width: 23.8 mm · Height: 23.8 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 4.6 mm · Hole spacing: 50 mm · Area of application: Standard
CHF 24.70
Collection only possible with online purchase and appointment.
