The cleaner is ideal for surface pre-treatment before bonding. The cleaning time is very short and can therefore be used directly before applying an adhesive or sealant. Very good quick cleaner, suitable for PVC, PC, ABS. Reliably removes oils, grease, loose dirt particles and stubborn dirt. Gives your moped a new shine and color freshness.
Also suitable for removing dirt and grime from your side guards, side panels, saddle, frame cover, plastic parts, etc. This cleaner is characterized by a fast drying time of 60 sec. at +20 °C. This Super Clean is suitable for optimum preparation for bonding with Loctite adhesives.
Content: 400 ml
Original Loctite product from the German manufacturer Henkel.
Accessories & related products
Loctite 7200 Adhesive and sealant remover 400 ml
Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Area of application: Chemistry · Area of application: Cleaner · Signal word: Danger · Hazard warning: Extremely flammable aerosol · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Manufacturer: Loctite · Hazard warning: Pressurized container: may burst when heated · Contents [ml]: 400 ml
CHF 32.40
CHF 81.00/l
Motorex Small Parts Cleaner Rex 5 L
Hazard warning: Causes damage to the central nervous system through prolonged or repeated exposure · Area of application: Chemistry · Area of application: Cleaner · Signal word: Danger · Hazard warning: Flammable liquid and vapor · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS08 - Harmful to health · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Manufacturer: Motorex · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Contents [ml]: 5000 ml
CHF 79.90
CHF 15.98/l
Moped fans like you also bought:
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Nominal diameter: 44 mm · Manufacturer: Airsal · Material: Cast aluminum · Surface: sandblasted · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 24 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Camouflaged: Yes · Area of application: Tuning
CHF 84.90
CHF 114.90
Oil filler plug with sealing ring | Puch Maxi
Material: Steel · Surface: blue galvanized · Thread type: M10x1.5 (standard thread) · Thread length: 6 mm · Total length: 14.6 mm · Screw head: Lens head · Ø External head: 14 mm · Drive: Slot · Number of components: 2 pcs · Puch spare part no.: 364.1.10.660.1
CHF 3.50
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Surface: blue galvanized · Color: silver · Thread type: M8x1.25 (standard thread) · Thread length: 12 mm · Screw head: Hexagon · Drive: External hexagon · Drive: Slot · Width across flats Screw: 13 mm · Total length: 18 mm · Puch spare part no.: 901.1053
CHF 3.50
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: blue galvanized · Area of application: Standard
CHF 2.80
Starter cable Puch Maxi Ø 1.5 mm x 160 cm
Ø Stranded wire: 1.5 mm · Cable length: 1600 mm · Nipple shape: Barrel (transverse) · Ø nipple: 8 mm · Nipple length: 12 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: blue galvanized · Area of application: Standard
CHF 2.80