Parts from swiing® ingenious parts
Precision, performance and innovation from swiing®
swiing® Ingenious Parts redefines moped parts. We take original components further and refine them with innovative solutions. Whether it’s high-end tuning parts for maximum performance or shadow tuning parts for subtle upgrades – our components deliver top-level precision, quality and functionality for demanding riders.
swiing® ingenious rear wheel nut M14 x 1.5 SW19 Inox | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Thread type: MF14x1.5 (fine pitch thread) · Drive: External hexagon · Nominal diameter (thread): 14 mm · Height: 24 mm · Width across flats: 19 mm
CHF 13.30
swiing® ingenious triangular bearing plate Inox | Piaggio Ciao, SI, Bravo, Grillo
Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: stainless · Area of application: Racing · Area of application: Tuning · Ø axle: 15 mm · Width: 101 mm · Total length: 13 mm · Thread type: M10x1.5 (standard thread) · Thread length: 13 mm · Number of fixing points: 2 pcs · Alternative version of the Piaggio OEM number: 124963
CHF 44.90
swiing® ingenious 16 mm intake manifold Bing SRE | Zündapp Belmondo (Type 247)
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 16 mm · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 40 mm · Number of fixing points: 2 pcs · Area of application: Tuning
CHF 39.90
swiing® ingenious 15 mm carburetor set (Bing SRE) | Zündapp Belmondo
Manufacturer: GPO · Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Nominal diameter: 16 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 40 mm · Clamping screw torque (max.): 4 N/m · Area of application: Tuning
CHF 119.90
swiing® ingenious piston 40 mm | Sachs 503
Manufacturer: swiing® ingenious parts · Nominal diameter: 40 mm · Thick piston ring: 1.7 mm · Ø outside piston (A): 39.97 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3.5 mm · Total piston height (E): 54 mm · Number of piston rings (F): 2 pcs · Piston ring impact: Internal fuse (IS) · Piston ring mold: Rectangular ring · Piston ring height: 1.5 mm · Weight piston kit: 83 g
CHF 54.90
swiing® ingenious 16 mm intake manifold (Dell'Orto SHA) | Puch X30 NS, NL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 16 mm · Ø External connection: 19 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Area of application: Tuning
CHF 69.50
swiing® ingenious 16 mm intake manifold Bing SRF | Zündapp Belmondo (Type 247)
Manufacturer: swiing® ingenious parts · Camouflaged: No · Material: Aluminum · Ø inside: 16 mm · Ø External connection: 23 mm · Mounting type: Screws · Hole spacing inlet: 40 mm · Number of fixing points: 2 pcs · Total height: 42 mm · Height flange center hole: 35 mm · Total length: 35 mm · Area of application: Tuning
CHF 39.90
swiing® ingenious pinion shaft reinforced | Zündapp Belmondo, Bergsteiger / Alpa
Manufacturer: swiing® ingenious parts · Material: Copper · Material: Steel · Surface: blank · Surface: coated · Recording type: Ø15 x SW12 · Ø inside: 12 mm · Ø outside: 22 mm · Ø outside: 23.8 mm · Thread type: MF12x1 (fine pitch thread) · Total length: 82.6 mm
CHF 77.90
swiing® ingenious axle swing arm set | Piaggio Ciao
Manufacturer: swiing® ingenious parts · Material: Brass · Material: Chrome steel (colloquially known as stainless steel) · Color: gold · Drive: External hexagon · Ø Bearing inside: 12.85 mm · Ø outside: 16 mm · Ø outside: 22 mm · Total length: 50 mm · Thread type: M8x1.25 (standard thread) · Thread length: 22 mm
CHF 29.90
swiing® ingenious connecting rod "Racing" | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: ground · Connecting rod length center-center: 90 mm · Total length: 90 mm · Ø Connecting rod bolt: 16 mm · Ø lower connecting rod eye outside: 28.2 mm · Ø upper connecting rod eye outside: 21.5 mm · Ø lower bearing inside: 21 mm · Ø inside upper bearing: 15 mm · Dimension lower bearing: 16/21 x 9.7 mm · Dimension upper bearing: 12/15 x 14.2 mm · Ø piston pin (B): 12 mm · Connecting rod pin length: 34 mm · Thickness: 10 mm · Area of application: Tuning
CHF 48.90
Page 1 of 40
swiing® Ingenious Parts stands for Swiss engineering, uncompromising quality and a clear mission: to further develop and perfect original parts. Using the latest manufacturing technology, we create high-end tuning parts that take performance and design to a new level, as well as shadow tuning parts that are difficult to identify. Our products improve the driving experience and make installation easier – for riders who want more.
#swiing #ingenious #parts
Thought through. Perfected. For riders who want more. That's swiing® Ingenious Parts.
Every detail counts – that's why swiing® Ingenious Parts focuses on well-thought-out improvements that go beyond mere performance enhancement. Our tuning parts offer optimized fit, more precise workmanship and easier assembly, so that the conversion goes as smoothly as possible. High-end tuning parts maximize performance and durability, while shadow tuning parts enable unobtrusive optimization. Developed using Swiss engineering and the latest manufacturing methods, they take original parts to a new level. The result: reliable, perfectly matched components for demanding riders who not only want to maintain their mopeds, but also to further develop them in a targeted way.
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
