37.97 mm piston with two 2 mm rectangular piston rings with flank lock (FS) suitable for Sachs 504/2 ACH and 504/1 ACH mopeds / mopeds.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their positions and locking types on the legend in the images.
Tolerance type: A
The piston kit contains piston pins, piston clips and piston rings.
You will find the corresponding assembly tool, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Original Sachs spare part number: A4358
Quality product from the Italian manufacturer Meteor.
Details
Manufacturer | Meteor |
Ø outside piston (A) | 37.97 mm |
Ø piston pin (B) | 12 mm |
Compression height (C) | 28 mm |
Curvature (D) | 3 mm |
Total piston height (E) | 53 mm |
Number of piston rings (F) | 2 pcs |
Piston ring mold | Rectangular ring |
Nominal diameter | 38 mm |
Piston ring impact | Flank safety device (FS) |
Piston ring height | 2 mm |
Suitable for the following models
Sachs | 504 (ohne Tretwelle) |
Accessories & related products
Meteor piston 37.98 mm type B | Sachs 504
Manufacturer: Meteor · Nominal diameter: 38 mm · Ø outside piston (A): 37.98 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Tolerance group: B
CHF 56.40
Meteor piston 37.99 mm type C | Sachs 504
Manufacturer: Meteor · Nominal diameter: 38 mm · Ø outside piston (A): 37.99 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Tolerance group: C
CHF 56.40
Meteor piston 38 mm type D | Sachs 504
Manufacturer: Meteor · Nominal diameter: 38 mm · Ø outside piston (A): 38 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Tolerance group: D
CHF 56.40
Not in stock
GPO piston pin extractor Ø 10, 12, 14 mm
Width across flats SW: 10 mm · Width across flats SW: 17 mm · Total length: 130 mm · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Manufacturer: GPO · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Number of components: 7 pcs
CHF 19.90
CHF 29.90
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Total length: 6 mm · Ø outside: 5 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Drive: Slot · Thread length: 4 mm
CHF 2.00
Magura adjusting screw brake short
Total length: 31 mm · Total length: 40 mm · Manufacturer: Magura · Material: Brass · Surface: nickel-plated · Color: silver · Thread type: MF6x0.75 (fine pitch thread) · Ø shaft: 6.1 mm · Ø External head: 9.15 mm · Drive: Knurled screw · Shank length: 6.9 mm · Thread length: 15 mm
CHF 3.40
Leonelli 6V voltage regulator (1A quality)
Total length: 50 mm · Ø mounting hole: 6 mm · Manufacturer: Leonelli · Width: 27 mm · Height: 15 mm · Material: Aluminum · Material: Plastic · Surface: raw · Tension: 6 V · Performance: 50 W · Type of current: Alternating current (AC) · Mounting type: Screws
CHF 29.90
CHF 34.90
VEC electronic ignition coil (replaces ignition coil, capacitor & contact breaker)
Number of fixing points: 2 pcs · Total length: 77 mm · Ø mounting hole: 4.6 mm · Manufacturer: VEC · Height: 48 mm · Area of application: Original · Area of application: Performance · Area of application: Standard · Color: black · Ø cable holder: 5 mm · Cable length: 140 mm · Cable length: 420 mm · Place of use: Internal (in the ignition) · Ø Internal flywheel: 90 mm · Hole spacing: 54 mm · Mounting type: Screws
CHF 99.90
Not in stock