High-quality, simple number plate holder made of black plastic with «mofakult» imprint for your moped / moped.
The number holder is attached to the rear mudguard or the side number holder. There are seven attachment points available for this purpose. If new holes need to be drilled into the mudguard, marking them in advance makes it easier to position them optimally.
After the license plate holder has been attached, the number plate is then fastened with two M5 screws. Extra threaded holes have been embedded in the plastic for this purpose. The use of spring washers is recommended to secure the number plate.
You can find the corresponding screws for the number frame in the accessories section.
Merchandise product of the Swiss quality brand mofakult Merch.
Details
| Manufacturer | mofakult Merch |
| Material | Plastic |
| Color | black |
| Mounting type | Nuts & bolts |
| Width | 108 mm |
| Thread type | M5x0.8 (standard thread) |
| Total length | 175 mm |
| Thread length | 6 mm |
| Height | 11 mm |
| Ø mounting hole | 6 mm |
| Number of fixing points | 9 pcs, 2 pcs |
| Hole spacing | 50 mm |
Accessories & related products
Plastic license plate holder
Manufacturer: Made in Switzerland · Material: Brass · Material: Plastic · Mounting type: Nuts & bolts · Width: 108 mm · Thread type: M5x0.8 (standard thread) · Height: 11 mm · Total length: 175 mm · Ø mounting hole: 6 mm · Hole spacing: 50 mm · Number of fixing points: 9 pcs · Thread length: 6 mm · Color: black
CHF 6.90
Serrated lock washer M4 - M12 galvanized
Material: Steel · Surface: galvanized (blue) · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8 · Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm
CHF 0.30
M6x22 hexagon head screw, galvanized
Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Thread type: M6x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 10 mm · Total length: 26 mm · Thread length: 22 mm · Strength class: 8.8 · Color: silver · Number of components: 1 pcs
CHF 1.10
Screw M5x10 pan-head Allen key, galvanized
Material: Steel · Surface: galvanized (blue) · Thread type: M5x0.8 (standard thread) · Drive: Hexagon socket · Screw head: Lens head · Ø External head: 9.5 mm · Width across flats SW: 3 mm · Shank: No · Total length: 13 mm · Thread length: 10 mm · Strength class: 10.9
CHF 0.90
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Drive: Slot · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Thread length: 4 mm · Number of components: 2 pcs · Ø outside: 5 mm
CHF 2.00
Stand 14 mm axle (1A quality) | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Stand base - center mount (A): 232 mm · Total width of stand base (B): 200 mm · Wide receptacle (C): 78 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 250 mm · Color: black
CHF 29.90
Headlight black | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Test mark: none · Housing material: Plastic · Tension: 6 V · Tension: 12 V · Color: black · Lens material: Plastic · Mounting type: Screws · Width: 125 mm · Bulb holder: P26s · Ø External connection: 6.3 mm · Height: 90 mm · Area of application: Original · Area of application: Standard · Number of fixing points: 2 pcs · Depth: 147 mm · Battery operated: No · Switch included: Yes · Speedometer recording: 48 mm · Piaggio OEM number: 584240
CHF 37.90
Tail light black | Piaggio Ciao PX, C24, Bravo
Manufacturer: Made in Italy · Material: Plastic · Test mark: none · Color: black · Color: red · Mounting type: Nuts & bolts · Bulb holder: BA9s · Height: 58 mm · Depth: 43 mm · Width: 130 mm · Battery operated: No · Number of fixing points: 2 pcs
CHF 18.90
Cable set black matt | Piaggio Ciao, SI, Bravo, Boxer
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Color: black · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm
CHF 19.90
Collection only possible with online purchase and appointment.
