Shaft seal ring 17x40x7 mm for use in the E50 engine of your Puch moped / moped.
This radial shaft seal ring (also known under the protected brand name Simmerring®) fits the E50 engine of Puch Maxi S / N, as well as Puch Supermaxi mopeds. A total of 3 pieces are required.
Ø inner: 17 mm
Ø outer: 40 mm
Width: 7 mm
Material: NBR
Temperature resistant: approx. -30 to +100 °C, briefly up to 120 °C
A DUO - With rubberized outer casing and two sealing lips.
Original Puch spare part number: 901.3801
Details
| Simmering type | A DUO - With rubberized outer casing / two sealing lips. |
| Manufacturer | Puch |
| Material | NBR |
| Surface | rubberized |
| Area of application | Standard |
| Width | 7 mm |
| Ø inside | 17 mm |
| Ø outside | 40 mm |
| Temperature resistance (min.) | -30 - 100 °C |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Contents [ml]: 10 ml · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
Oil seal FPM 17/40/7 DUO | Puch E50
Simmering type: A DUO - With rubberized outer casing / two sealing lips. · Ø inside: 17 mm · Ø outside: 40 mm · Manufacturer: Puch · Width: 7 mm · Material: FPM - Fluororubber · Area of application: Standard · Surface: rubberized · Temperature resistance (min.): -30 - 200 °C
CHF 9.90
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Color: silver · Resistance: 1000 Ω · Suppressed: Yes · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
CHF 8.75
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Area of application: Standard · Decompressor: Yes · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44
CHF 9.90
swiing® revival stud bolt set M6 x 106 mm | Puch
Manufacturer: swiing® revival parts · Total length: 106 mm · Material: Steel · Thread type: M6x1 (standard thread) · Surface: galvanized (blue) · Diameter: 5.9 mm · Width across flats SW: 10 mm · Drive: External hexagon · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
CHF 7.40
NTN 6203 NR C3 ball bearing 17/40/12(11) with outer ring (new model) | Puch E50
Bearing type: Deep groove ball bearing · Bearing cage: "-" Sheet steel cage ball-guided · Inner ring width: 11 mm · Manufacturer: NTN · Bearing clearance: C3 · Groove ring: Yes · Width: 12 mm · Stock number: 6203 · Ø inside: 17 mm · Ø outside: 40 mm
CHF 17.90
NTN 6203 Ball bearing 17/40/12
Bearing type: Deep groove ball bearing · Inner ring width: 12 mm · Manufacturer: NTN · Ø inside: 17 mm · Ø outside: 40 mm · Bearing clearance: CM (special/noise-reduced) · Bearing cage: "-" Sheet steel cage ball-guided · Material: Steel · Width: 12 mm · Surface: blank · Stock number: 6203 · Ball bearing closed: No
CHF 6.50
Oil seal NBR 22/40/7 A DUO crankshaft | Puch E50
Simmering type: A DUO - With rubberized outer casing / two sealing lips. · Manufacturer: Puch · Material: NBR · Surface: rubberized · Place of use: Crankshaft · Ø outside: 40 mm · Ø inside: 22 mm · Width: 7 mm · Temperature resistance (min.): -30 - 100 °C
CHF 5.90
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Ø inside: 106 mm · Ø outside: 116 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Thickness: 1 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
CHF 3.90
Collection only possible with online purchase and appointment.
