Zinc-plated pedal axle with keyway suitable for Piaggio Si mopeds / mopeds.
The pedal shaft is designed for mounting the pedal arms by means of a key.
The pedal axle is firmly welded to the sprocket.
You can find an alternative pedal shaft and other attachments in the accessories section.
Original Piaggio spare part. NOS – New from old stock.
Original Piaggio spare part number: 269153
Details
| Manufacturer | Piaggio |
| Material | Steel |
| Surface | blue galvanized |
| Chain pitch | 1/2" x 1/8" |
| Number of teeth | 23 pcs |
| Wavelength from wreath | 196 mm, 57 mm |
| Ø Outer sprocket | 99 mm |
| Ø Pedal arm holder | 16 mm |
| Ø Bearing support | 16 mm |
| Total length | 260 mm |
| Crank (wreath) | 2 mm |
| Piaggio spare part no. | 269153 |
Suitable for the following models
| Piaggio | Si |
Accessories & related products
GPO pedal axle 23 teeth with keyway | Piaggio SI
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Chain pitch: 1/2" x 3/16" · Number of teeth: 23 pcs · Total length: 257 mm · Wavelength from wreath: 60 mm · Wavelength from wreath: 194 mm · Ø Outer sprocket: 100 mm · Ø Pedal arm holder: 16 mm · Ø Bearing support: 15.9 mm · Crank (wreath): 2 mm
CHF 49.90
Moped fans like you also bought:
Dell'Orto 16/16 SHA carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Area of application: Tuning · Color: black · Nominal diameter: 16 mm · Carburetor type: SHA (type 4) · Total length: 82 mm · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Height: 111 mm · Ø without reducing sleeve: 21 mm · Ø Inside entrance: 16 mm · Mounting type: Plug connection clamped · Ø Output inside: 16 mm · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Ø Internal connection: 19 mm · Width: 72 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5 · Camouflaged: No · Nozzle size: 82
CHF 69.90
Dell'Orto 90° carburetor pipe bend set M6x0.75
Manufacturer: Dell'Orto · Material: Brass · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Total length: 43 mm · Total length: 52 mm · Height: 27 mm · Ø outside: 6 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 90 ° · Width across flats nut: 7 mm
CHF 11.90
Mazzucchelli crankshaft "Original" 12 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Mazzucchelli · Material: Steel · Cheek type: standard · Crankshaft stroke: 43 mm · Ø coupling pin / vario pin: 12 mm · Connecting rod length center-center: 87 mm · Total length crankpin ignition side: 90 mm · Total length crankpin ignition side: 106 mm · Ø crank webs: 69.7 mm · Ø piston pin (B): 12 mm · Thread length: 16 mm · Ø Connecting rod eye: 15 mm · Bearing seat right: 15 mm · Ø Bearing seat (ignition side): 15 mm · Thread type: M8x1.25 (standard thread) · Dimension needle bearing: 12 / 15 x 14.7 mm (axe 12) · Wide crank webs: 33 mm · Length 1st paragraph: 21 mm · Length 2nd paragraph: 44 mm · Length 3rd paragraph: 63.5 mm · Ø 1st step (on the coupling side): 15 mm · Ø 2nd shoulder (on the clutch side): 14.4 mm · Ø 3rd step (on the clutch side): 12 mm · Inlet control time: 130 ° · Control time before O.T: 77 ° · Control time according to O.T: 53 ° · Weight: 698 g · Number of gears: 1 pcs · Area of application: Original · Area of application: Standard
CHF 144.90
swiing® ingenious 16 mm SHA intake manifold Speed Engine (Version 2.0) | Piaggio Ciao, SI, Bravo
Manufacturer: swiing® ingenious parts · Camouflaged: No · Material: Aluminum · Surface: anodized · Color: graphite colors · Ø inside: 16 mm · Ø External connection: 19 mm · Mounting type: Screws · Hole spacing inlet: 36 mm · Number of fixing points: 2 pcs · Total height: 24.2 mm · Total length: 29 mm · Area of application: Tuning
CHF 32.90
Collection only possible with online purchase and appointment.
