Pinasco «Master» engine case with crankshaft (43 mm stroke / 12 mm KoBo) and normal intake suitable for your Piaggio Ciao, Si, Bravo, Boxer, Grillo moped / moped.
The Pinasco «Power Casing» engine case is supplied with a specially designed crankshaft, which has a wide cheek to control the intake. A standard 13 mm Dellorto SHA carburetor can be fitted to the rear of this housing.
The following parts are included in the scope of delivery:
No housing gasket is supplied. Sealing compound is used for sealing.
We recommend using the 42 mm Pinasco cylinder kit for this racing gear. In addition, only electronic ignitions can be fitted to this housing.
If the engine is installed in a Piaggio Ciao frame, some material must be removed from the right-hand side of the housing and cylinder. This process is described in the assembly instructions.
Corresponding add-on parts such as sealant, racing kit, racing ignition etc. can be found in the accessories section.
Quality product from the Italian manufacturer Pinasco.
Details
Manufacturer | Pinasco |
Material | Aluminum |
Crankshaft stroke | 43 mm |
Ignition type | Electronic |
Suitable for the following models
Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
Malossi racing ignition 12V | Piaggio Ciao, SI, Bravo, Boxer
Number of fixing points: 2 pcs · Manufacturer: Malossi · Weight: 804 g · Weight: 890 g · Area of application: High End · Area of application: Performance · Area of application: Racing · Material: Steel · Area of application: Tuning · Light coil voltage: 12 V · Performance: 90 W · Direction of rotation: right · Ø cable: 7 mm · Ø Internal flywheel: 80.5 mm · Ø Flywheel outside: 105 mm · Ø Flywheel outside: 139.5 mm · Mounting type: Screws
CHF 417.40
SKF 6202 C3 ball bearing 15/35/11
Bearing type: Deep groove ball bearing · Stock number: 6202 · Ø inside: 15 mm · Inner ring width: 11 mm · Ø outside: 35 mm · Manufacturer: SKF · Width: 11 mm · Bearing clearance: C3 · Bearing cage: "-" Sheet steel cage ball-guided · Puch spare part no.: 900.4.6202
CHF 9.90
CHF 12.90
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Area of application: Chemistry · Material: Silicone · Contents [ml]: 70 ml · Color: gray · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Temperature resistance (min.): -60 - 315 °C · Gap dimension (max.): 2 mm
CHF 19.90
CHF 284.29/l
Dell'Orto 13/13 SHA carburetor hand choke | Piaggio Ciao P, SC
Total length: 55 mm · Manufacturer: Dell'Orto · Width: 60 mm · Height: 110 mm · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Color: black · Nominal diameter: 13 mm · Carburetor type: SHA (type 3) · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 18 mm · Ø Inside entrance: 13 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.9 mm · Ø Internal connection: 16 mm · Mixed oil connection: No · Vacuum connection: No · Mounting type: Plug connection clamped · Choke control: Hand choke · Nozzle thread: M5 · Nozzle size: 66
CHF 69.90
Malossi oil seal FKM/PTFE 15/24/5 A crankshaft | Piaggio Ciao, SI, Bravo, Boxer
Simmering type: A - With rubberized outer part / one sealing lip. · Ø inside: 15 mm · Ø outside: 24 mm · Manufacturer: Malossi · Width: 5 mm · Material: Viton · Surface: rubberized · Place of use: Crankshaft · Temperature resistance (min.): -30 - 200 °C
CHF 14.30
Pinasco 42 mm cylinder kit EVOTEN 12 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Number of fixing points: 3 pcs · Manufacturer: Pinasco · Material: Cast aluminum · Camouflaged: No · Area of application: Tuning · Surface: varnished · Nominal diameter: 42 mm · Crankshaft stroke: 43 mm · Displacement: 60 ccm · Ø piston pin (B): 12 mm · Ø Outlet outside: 22.5 mm · Decompressor: Yes · Outlet type: clamped
CHF 369.90