38 mm replacement piston / piston kit with two pieces of 2 mm rectangular piston rings with flank lock (FS) suitable for the windage-cooled cylinder of Sachs 50/3 & 50/4 mopeds / mopeds with square intake.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their stems and locking types on the legend in the pictures.
The piston kit contains piston pins, piston clips and piston rings.
Corresponding assembly tools, piston rings, piston pin retainers etc. can be found under accessories.
Original Sachs spare part number: 0290 058 025
Details
| Ø outside piston (A) | 37.94 mm |
| Compression height (C) | 28 mm |
| Curvature (D) | 2.95 mm |
| Total piston height (E) | 53 mm |
| Number of piston rings (F) | 2 pcs |
| Nominal diameter | 38 mm |
| Piston ring mold | Rectangular ring |
| Ø piston pin (B) | 12 mm |
| Piston ring impact | Flank safety device (FS) |
| Piston ring height | 2 mm |
| Piston weight | 73 g |
Suitable for the following models
| Sachs | 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) |
Accessories & related products
38 mm cylinder kit square inlet | Sachs 50/3, 50/4
Material: Gray cast iron · Area of application: Tuning · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Ø piston pin (B): 12 mm · Nominal diameter: 38 mm · Thread inlet: M5x0.8 (standard thread) · Number of fixing points: 4 pcs · Hole spacing inlet: 31 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Hole pattern [mm]: 51 x 40 · Camouflaged: No
CHF 129.90
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Total length: 130 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm · Number of components: 7 pcs
CHF 19.90
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Total length: 15 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Width across flats SW: 7 mm · Ø outside: 8 mm · Thread length: 7 mm
CHF 2.50
OMG fuel filter metal 6 mm (removable)
Manufacturer: OMG · Material: Glass · Material: Metal · Color: gray · Color: transparent · Color: white · Filter type: Plastic net · demountable: Yes · Total length: 40 mm · Total length: 63 mm · Ø inside: 3.45 mm · Ø outside: 22 mm · Ø fuel hose connection: 5.6 mm · Ø fuel hose connection: 6 mm
CHF 6.75
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Total length: 6 mm · Thread length: 4 mm · Number of components: 2 pcs
CHF 2.00
GPO ignition plate set 90 mm (Bosch, Ducati Replica)
Manufacturer: GPO · Material: Aluminum · Area of application: Original · Area of application: Standard · Number of cables: 3 pcs · Surface: dull · Color: gray · Tension: 6 V · Ø inside: 18.5 mm · Ø outside: 90 mm · Cable length: 400 mm · Cable length: 500 mm · Number of fixing points: 4 pcs · Ø bolt circle: 80 mm
CHF 74.90
Magura adjusting screw brake short
Manufacturer: Magura · Material: Brass · Surface: nickel-plated · Color: silver · Thread type: MF6x0.75 (fine pitch thread) · Drive: Knurled screw · Ø External head: 9.15 mm · Ø shaft: 6.1 mm · Total length: 31 mm · Total length: 40 mm · Shank length: 6.9 mm · Thread length: 15 mm
CHF 3.40
Hot 
Leonelli 6V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: raw · Type of current: Alternating current (AC) · Tension: 6 V · Performance: 50 W · Mounting type: Screws · Total length: 50 mm · Width: 27 mm · Height: 15 mm · Ø mounting hole: 6 mm
CHF 29.90
Flat nut M21x1 LH clutch | Sachs 50/2, 503 AB/ABL/2AL/2BL (A1504)
Nut type: Hexagon flat nut · Thread type: MF21x1 LH (fine/left-hand thread) · Drive: External hexagon · Width across flats SW: 26 mm · Pony spare part no.: A1504 · Sachs spare part no.: 0242 030 005 · Sachs spare part no.: 0242 030 105
CHF 7.50
Collection only possible with online purchase and appointment.
