Polini has placed particular emphasis on size and weight in the development of the CP model; this carburetor is therefore particularly compact and around 40% lighter than traditional carburetors.
Due to the compact design, the intake path is very short. Unique is the concentric design of the passage, i.e. a circular passage instead of an oval one as with most other carburettors - a geometry that optimizes the air flow. Modifications to the mixing tube and the use of a larger needle ensure better atomization of the gas mixture.
This is intended to simplify carburetor tuning and enable high performance with low consumption. All CP carburetors have an oil and vacuum connection.
Inlet connection diameter: 24 or 26 mm if the bushes are removed.
Connection diameter of air filter: 46 mm
Main nozzle size: 66
Side nozzle size: 42
Choke is located directly on the carburetor and must be operated by hand.
Special Polini nozzles must be used.
Quality product from the Italian manufacturer Polini.
Details
| Nominal diameter | 19 mm |
| Width | 66 mm |
| Manufacturer | Polini |
| Material | Aluminum |
| Component group Carburetor | Carburetor complete |
| Area of application | Tuning, Racing, Performance, High End |
| Carburetor type | CP |
| Ø fuel hose connection | 7 mm, 6 mm |
| Ø without reducing sleeve | 26 mm |
| Height | 135 mm |
| Ø Internal connection | 24 mm |
| Ø Inside entrance | 19 mm |
| Ø Output inside | 19 mm |
| Mounting type | Plug connection clamped |
| Ø Air filter connection | 46 mm |
| Mixed oil connection | Yes |
| Vacuum connection | Yes |
| Choke control | Hand choke |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle block | 35-12 |
| Nozzle size | 66 |
| Camouflaged | No |
| Size of secondary nozzle | 42 |
| Total length | 73.5 mm |
Accessories & related products
Polini intake system 4-folding diaphragm "Big Valve" PHBG / CP carburetor | Puch
Ø inside: 28.6 mm · Manufacturer: Polini · Material: Aluminum · Material: Plastic · Surface: glass bead blasted · Thread type: M5x0.8 (standard thread) · Number of flaps: 4 pcs · Membrane material: Carbonite · Thick membrane platelets: 0.3 mm · Ø mounting hole: 5.2 mm · Ø outside: 24 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Camouflaged: No · Area of application: Racing · Area of application: Tuning
CHF 139.90
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm · Nipple length: 5 mm
CHF 2.80
Airsal intake manifold 46 / 47 mm cylinder | Puch
Manufacturer: Airsal · Material: Aluminum · Area of application: Tuning · Mounting type: Screws · Total length: 60 mm · Ø inside: 19 mm · Hole spacing inlet: 38 mm · Total height: 75 mm · Height flange center hole: 65 mm · Ø External connection: 24 mm · Number of fixing points: 2 pcs · Camouflaged: No
CHF 39.90
Polini jet set (80 - 98) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Nozzle type: Main nozzle · Drive: External hexagon · Nozzle size: 54 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 86 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98
CHF 39.90
Polini jet set (60 - 78) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Drive: External hexagon · Carburetor type: Keihin · Carburetor type: PWK · Nozzle type: Main nozzle · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74 · Nozzle size: 76 · Nozzle size: 78
CHF 39.90
Polini 43.5 mm cylinder kit reed valve with head (version 2.0) | Puch
Manufacturer: Polini · Material: Aluminum · Surface: nikasil-coated · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 43.5 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 22 mm · Inlet window: 26 x 21 · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 32 mm · Hole spacing inlet: 39 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Number of fixing points: 4 pcs · Camouflaged: No · Area of application: Racing · Area of application: Tuning
CHF 399.00
Collection only possible with online purchase and appointment.
