Special intake manifold for mopeds / mopeds with Airsal 46 and 47 mm racing cylinders.
Of course also fits all other cylinders. Carburettor comes out from the side.
Ø inside: 19 mm
Ø outside: 24 mm
This intake manifold is therefore compatible with all Dell'Orto PHBG carburettors.
Quality product from the Spanish manufacturer Airsal.
Details
| Total length | 60 mm |
| Manufacturer | Airsal |
| Material | Aluminum |
| Ø inside | 19 mm |
| Ø External connection | 24 mm |
| Number of fixing points | 2 pcs |
| Mounting type | Screws |
| Total height | 75 mm |
| Height flange center hole | 65 mm |
| Area of application | Tuning |
| Hole spacing inlet | 38 mm |
| Camouflaged | No |
Suitable for the following models
| Puch |
Accessories & related products
Airsal 46 mm cylinder kit straight exhaust | Puch
Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Crankshaft stroke: 43 mm · Nominal diameter: 46 mm · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Area of application: Tuning · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 38 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No
CHF 199.90
Dell'Orto 19 mm PHBG CS carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Color: black · Carburetor type: PHBG CS · Nominal diameter: 19 mm · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Total length: 82 mm · Ø Output inside: 19 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø Internal connection: 24 mm · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Width: 70 mm · Mixed oil connection: Yes · Height: 124 mm · Mounting type: Plug connection clamped · Vacuum connection: Yes · Choke control: Hand choke · Area of application: Racing · Area of application: Tuning · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 75 · Size of secondary nozzle: 45
CHF 119.90
Airsal 47 mm cylinder kit angled exhaust | Puch
Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Nominal diameter: 47 mm · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Area of application: Tuning · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Outlet type: slanted · Hole spacing inlet: 38 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No
CHF 169.90
Dell'Orto 17.5 mm PHBG carburetor cable choke
Manufacturer: Dell'Orto · Mounting type: Plug connection clamped · Carburetor type: PHBG · Width: 75 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Nominal diameter: 17.5 mm · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Nozzle size: 82 · Height: 130 mm · Area of application: Tuning · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Choke control: Cable choke · Choke nozzle size: 55 · Size of secondary nozzle: 55
CHF 124.90
Dell'Orto 16 mm PHBG AS carburetor hand choke
Manufacturer: Dell'Orto · Mounting type: Plug connection clamped · Carburetor type: PHBG AS · Width: 75 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Nominal diameter: 16 mm · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Nozzle size: 74 · Height: 125 mm · Area of application: Tuning · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Choke control: Hand choke · Choke nozzle size: 60 · Size of secondary nozzle: 50
CHF 129.90
Dell'Orto 17 mm PHBG AS carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Color: black · Mounting type: Plug connection clamped · Carburetor type: PHBG AS · Width: 66 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Nominal diameter: 17 mm · Ø Internal connection: 24 mm · Total length: 71.6 mm · Ø without reducing sleeve: 26 mm · Nozzle size: 78 · Height: 123 mm · Area of application: Tuning · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mixed oil connection: No · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle block: 262AU · Camouflaged: No · Size of secondary nozzle: 50
CHF 124.90
Airsal 47 mm cylinder kit (straight exhaust) | Puch
Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Ø cylinder neck: 51 mm · Nominal diameter: 43 mm · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Area of application: Tuning · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Outlet type: slanted · Hole spacing inlet: 38 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No
CHF 209.90
Moped fans like you also bought:
Airsal 46 mm cylinder kit straight exhaust | Puch
Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Crankshaft stroke: 43 mm · Nominal diameter: 46 mm · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Area of application: Tuning · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 38 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No
CHF 199.90
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Material: Spring steel · Surface: coated · Manufacturer: swiing® ingenious parts · Ø wire: 1.7 mm · Number of components: 3 pcs · Ø outside: 8.3 mm · Ø inside: 4.8 mm · Total length: 28 mm · Color: blue · Area of application: Tuning
CHF 17.90
Dell'Orto 19 mm PHBG CS carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Color: black · Carburetor type: PHBG CS · Nominal diameter: 19 mm · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Total length: 82 mm · Ø Output inside: 19 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø Internal connection: 24 mm · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Width: 70 mm · Mixed oil connection: Yes · Height: 124 mm · Mounting type: Plug connection clamped · Vacuum connection: Yes · Choke control: Hand choke · Area of application: Racing · Area of application: Tuning · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 75 · Size of secondary nozzle: 45
CHF 119.90
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 2200 mm · Number of components: 1 pcs · Nipple length: 5 mm · Area of application: Standard
CHF 2.80
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Reserve level: 70 mm
CHF 9.90
Motorex Automatic Motor Oil (ATF) 450 ml
Temperature resistance (min.): -45 - 200 °C · Manufacturer: Motorex · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Area of application: Gearbox lubrication with clutch · Pony OEM number: A2080 · Sachs OEM number: 0263 014 002
CHF 9.90
CHF 22.00/l
swiing nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
Manufacturer: swiing · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA (type 3) · Carburetor type: SHA (type 4) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92
CHF 20.90
Polini CP 19 mm carburetor (hand choke)
Manufacturer: Polini · Material: Aluminum · Mounting type: Plug connection clamped · Carburetor type: CP · Width: 66 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Nominal diameter: 19 mm · Ø Internal connection: 24 mm · Total length: 73.5 mm · Ø without reducing sleeve: 26 mm · Nozzle size: 66 · Ø Inside entrance: 19 mm · Height: 135 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø Output inside: 19 mm · Ø Air filter connection: 46 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle block: 35-12 · Camouflaged: No · Size of secondary nozzle: 42
CHF 139.90
Polini CP 17.5 mm carburetor (hand choke)
Manufacturer: Polini · Mounting type: Plug connection clamped · Carburetor type: CP · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Nominal diameter: 17.5 mm · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Nozzle size: 62 · Area of application: Tuning · Ø Air filter connection: 46 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Size of secondary nozzle: 40
CHF 139.90
Collection only possible with online purchase and appointment.
