Drive belt for your Piaggio Si and Boxer moped / moped with mono drive.
The following combinations are possible with this mono belt:
| Ø clutch | Ø Pully | Engine position | Pully type |
| 56 mm | 94 mm | Rear | Piaggio (original) |
| 56 mm | 94 mm | Rear | Replica |
| 56 mm | 90 mm | rear | swiing® |
| 56 mm | 85 mm | Center - Front | swiing® |
| 66 mm | 83 mm | Rear | Piaggio (original) |
| 66 mm | 80 mm | Center - rear | Replica |
| 66 mm | 75 mm | Center - rear | swiing® |
| 66 mm | 70 mm | Front | Replica |
| 66 mm | 70 mm | Center - front | swiing® |
Note: When using original Ø 94 mm pullys, the V-belt is very tight, but can still be fitted. Please note that the engine must be pushed all the way back when fitting.
Details
| Manufacturer | RMS |
| Outer width | 9.8 mm |
| Rolling circumference | 1140 mm |
| Height | 8 mm |
| Belt profile | untoothed / untoothed |
| Gearbox type | Mono |
| Piaggio OEM number | 124593 |
Suitable for the following models
| Piaggio | Si Boxer |
Accessories & related products
Not so nice 
Clutch 56 mm (reproduction) | Piaggio, Ciao, SI, Bravo, Boxer
Manufacturer: Quenching · Material: Steel · Surface: coated · Material addition: Composite materials · Number of springs: 2 pcs · Number of springs: 3 pcs · Ø outside: 90 mm · Ø inside: 8.45 mm · Ø inside: 12 mm · Ø Outer pulley: 56 mm · Number of jaws: 2 pcs · Number of jaws: 3 pcs · Area of application: Standard
CHF 39.90
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
CHF 8.75
Plastic license plate holder
Manufacturer: Made in Switzerland · Material: Brass · Material: Plastic · Color: black · Width: 108 mm · Total length: 175 mm · Height: 11 mm · Mounting type: Nuts & bolts · Hole spacing: 50 mm · Thread type: M5x0.8 (standard thread) · Number of fixing points: 9 pcs · Thread length: 6 mm · Ø mounting hole: 6 mm
CHF 6.90
swiing nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing · Component group Carburetor: Spraying · Material: Brass · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Quantity: 10 pcs · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Drive: Slot · Total length: 8 mm
CHF 20.90
Stand set | Piaggio SI, Grillo
Manufacturer: Made in Italy · Material: Steel · Color: black · Surface: varnished · Stand base - center mount (A): 225 mm · Total width of stand base (B): 220 mm · Wide receptacle (C): 89 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 265 mm
CHF 24.90
EFFE Condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: EFFE · Capacity: 0.26 µF · Ø outside: 18 mm · Mounting type: Tab for screwing · Connection type: Cable for screwing · Height: 26 mm · Area of application: Original · Area of application: Standard · Ø mounting hole: 4.4 mm · Piaggio OEM number: 102939
CHF 11.90
Malossi air filter | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Malossi · Material: Plastic · Color: black · Width: 95 mm · Ø outside: 53.2 mm · Filter type: Foam · Total length: 31.2 mm · Ø Internal connection: 51 mm · Height: 88.7 mm · Mounting type: Plug connection clamped · Area of application: Tuning · Camouflaged: No
CHF 19.90
Collection only possible with online purchase and appointment.
