Black, adjustable shock absorbers with pink coil springs for your moped, moped and small motorcycle.
The hardness or preload of the shock absorbers can be adjusted using the special spring mount.
Length (mount - mount): 300 mm
Outer diameter of coil spring: 50 mm
Holt diameter: 30 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Details
| Surface | varnished |
| Color | pink, black |
| Damping type | Spring |
| Adjustable | Yes |
| Ø Fastening inside | 10 mm |
| Ø spars | 30 mm |
| Ø outside | 50 mm |
| Mounting type | Nuts & bolts |
| Hole spacing | 300 mm |
| Number of fixing points | 2 pcs |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
CHF 21.90
CHF 2’190.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Surface: varnished · Damping type: Hydraulic (oil) · Color: black · Adjustable: Yes · Ø Fastening inside: 10 mm · Mounting type: Nuts & bolts · Ø spars: 32 mm · Number of fixing points: 2 pcs · Ø outside: 52 mm · Hole spacing: 330 mm
CHF 139.90
MKX shock absorber 30 cm chrome
Manufacturer: MKX · Material: Aluminum · Material: Steel · Surface: chrome-plated · Damping type: Spring · Adjustable: Yes · Ø outside: 46 mm · Color: Chrome · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Hole spacing: 300 mm · Ø spars: 24 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
CHF 49.90
Moped fans like you also bought:
GPO license plate holder Inox
Total length: 145 mm · Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Color: silver · Width: 105 mm · Mounting type: Nuts & bolts · Height: 5.3 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Ø mounting hole: 5 mm · Thread type: M5x0.8 (standard thread) · Number of fixing points: 2 pcs · Thread length: 8 mm
CHF 9.50
CHF 10.90
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Component group Carburetor: Spraying · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
CHF 8.75
GPO 15 mm carburetor tuning | Puch
Manufacturer: GPO · Area of application: Tuning · Component group Carburetor: Carburetor complete · Material: Aluminum · Nominal diameter: 15 mm · Carburetor type: SRE · Total length: 66 mm · Width: 50 mm · Ø fuel hose connection: 6 mm · Height: 95 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: No · Clamping screw torque (max.): 4 N/m
CHF 57.90
CHF 64.90
Not so nice 
15 mm intake manifold | Puch E50
Area of application: Tuning · Material: Aluminum · Hole spacing inlet: 38 mm · Mounting type: Screws · Ø inside: 14.5 mm · Number of fixing points: 2 pcs · Total length: 47 mm · Height flange center hole: 43 mm · Total height: 54 mm · Ø External connection: 20 mm · Camouflaged: Yes
CHF 12.00
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Color: black · Color: silver · Number of teeth: 10 pcs · Total length: 175 mm · Ø outside sprocket: 36 mm · Thread type: M6x1 (standard thread) · Number of fixing points: 1 pcs
CHF 9.90
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Manufacturer: Airsal · Area of application: Tuning · Material: Aluminum · Surface: sandblasted · Ø piston pin (B): 12 mm · Nominal diameter: 44 mm · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Hole spacing inlet: 38 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 24 / 20 x 15 · Hole spacing outlet: 42 mm · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Decompressor: Yes · Outlet type: straight · Hole pattern [mm]: 44 x 44 · Thread outlet: M6x1 (standard thread) · Camouflaged: Yes
CHF 89.90
Collection only possible with online purchase and appointment.
