Hot 
Handmade aluminum side covers for your Sachs 503 Pony Junior, Sachs 503 GT and other Sachs moped / moped models.
The side covers are of the highest quality and are an absolutely worthy alternative to the original side plates that have long been unavailable.
Every detail is almost perfectly modeled on the original. The covers can either be installed directly or painted.
Dimensions of the side panels:
Total length: 630 mm
Width: 70 mm
Distance of the mounting holes rear - center: 280 mm
Distance of the mounting holes center - front: 210 mm
To avoid any stress cracks or cracks caused by vibrations, the chain sliders should be mounted on rubber (vibration dampers).
Corresponding attachments such as clamping screw, footboard etc. can be found under accessories.
A quality product made in Switzerland.
Details
| Manufacturer | Made in Switzerland |
| Width | 70 mm |
| Height | 145 mm |
| Material | Aluminum |
| Total length | 630 mm |
| Surface | blank |
| Color | silver |
| Ø mounting hole | 6 mm |
| Number of fixing points | 6 pcs |
Suitable for the following models
| Sachs |
Accessories & related products
Hot
Rear light ULO | Sachs, Puch
Test mark: none · Material: Aluminum · Color: Chrome · Material: Steel · Color: red · Tension: 6 V · Width: 57 mm · Bulb holder: E10 · Height: 90 mm · Number of fixing points: 2 pcs · Ø Receptacle: 5 mm · Depth: 55 mm · Mounting type: Nuts & bolts · Battery operated: No
CHF 58.70
Not in stock
Moped fans like you also bought:
GPO license plate holder Inox
Total length: 145 mm · Width: 105 mm · Height: 5.3 mm · Manufacturer: GPO · Number of fixing points: 2 pcs · Hole spacing: 30 mm · Hole spacing: 50 mm · Ø mounting hole: 5 mm · Material: Chrome steel (stainless steel) · Thread type: M5x0.8 (standard thread) · Color: silver · Thread length: 8 mm · Mounting type: Nuts & bolts
CHF 10.90
Magura set screw M6x34 mm lock nut SW8
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Ø cable holder: 3.05 mm · Thread type: M6x1 (standard thread) · Slotted: No · Total length: 34 mm · Width across flats Screw: 8 mm · Thread length: 24 mm · Ø Receptacle: 7.05 mm · Width across flats nut: 8 mm
CHF 2.50
swiing® revival wheel axle M10.5x1 x 175 coaster brake galvanized
Total length: 175 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: MF10.5x1 (fine pitch thread) · Ø shaft: 10.5 mm · Thread length: 34 mm · Thread length: 45 mm · Shank length: 95.6 mm
CHF 23.90
Continental 2.00 - 2.50 x 17" tube
Valve type: TR6 car valve · Manufacturer: Continental · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Tire height [%]: 100 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Wheel size [inch]: 17 " · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5
CHF 14.90
Magura cable clamp Sachs shift/clutch arm
Total length: 11 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Ø shaft: 4 mm · Ø Cable bushing: 2.8 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Ø outside: 7 mm · Ø Bundle: 7 mm · Thread length: 7 mm · Width across flats SW: 6 mm
CHF 2.50
Clamps, nipples & set screws set 73 pcs.
Storage method: Plastic box · Manufacturer: Made in Germany · Number of components: 73 pcs · Material: Brass · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Surface: raw · Drive: External hexagon · Drive: Knurled screw · Drive: Slot · Screw head: Hexagon · Dimension storage box: 18.5 x 11.0 x 1.8 cm
CHF 59.90
Collection only possible with online purchase and appointment.
