Mudguard for the front mudguard suitable for Piaggio Si mopeds / mopeds.
The mudguard rubber has a high-quality finish and the edges are cleanly deburred. It is attached to the mudguard with pop rivets.
Total length: approx. 100 mm
Mounting width of mudguard: 90 mm
Ø Fastening length: 3.2 mm
Original Piaggio spare part number: 267797 / 272088 / 189478
A quality product made in Italy.
Details
| Color | black |
| Manufacturer | Made in Italy |
| Material | Rubber |
| Width | 90 mm |
| Total length | 100 mm |
| Ø mounting hole | 3.2 mm |
| Number of fixing points | 2 pcs |
| Piaggio spare part no. | 272088, 189478, 267797 |
Suitable for the following models
| Piaggio | Si |
Accessories & related products
swiing® revival 16" front fender primed | Piaggio SI
Manufacturer: swiing® revival parts · Material: Steel · Surface: primed · Wheel size [inch]: 16 " · Color: black · Folding the ends: open folded · Shape of the mudguard: partly round · Total length over ends: 550 mm · Scope: 705 mm · Wide mudguard profile: 90 mm · Height of mudguard profile: 33 mm · Total height from support surface to top edge: 190 mm · Mounting type: Nuts & bolts · Piaggio spare part no.: 267651
CHF 34.90
CHF 47.90
swiing® revival 16" front fender chrome | Piaggio SI
Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Wheel size [inch]: 16 " · Color: Chrome · Folding the ends: not folded · Folding the ends: open folded · Shape of the mudguard: partly round · Total length over ends: 550 mm · Scope: 705 mm · Wide mudguard profile: 90 mm · Height of mudguard profile: 33 mm · Total height from support surface to top edge: 190 mm · Mounting type: Nuts & bolts
CHF 59.90
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm · Mounting type: Union nut
CHF 9.90
Stand set | Piaggio SI
Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 225 mm · Total width of stand base (B): 220 mm · Wide receptacle (C): 89 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 265 mm
CHF 24.90
Dell'Orto 13/13 SHA carburetor hand choke | Piaggio Ciao PX, C24
Total length: 46 mm · Manufacturer: Dell'Orto · Width: 60 mm · Height: 96 mm · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Color: black · Nominal diameter: 13 mm · Carburetor type: SHA (type 3) · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 18 mm · Ø Inside entrance: 13 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Ø Internal connection: 16 mm · Mixed oil connection: No · Vacuum connection: No · Mounting type: Plug connection clamped · Choke control: Hand choke · Nozzle thread: M5 · Nozzle size: 66
CHF 59.90
swiing® revival 16" front fender primed | Piaggio SI
Manufacturer: swiing® revival parts · Material: Steel · Surface: primed · Wheel size [inch]: 16 " · Color: black · Folding the ends: open folded · Shape of the mudguard: partly round · Total length over ends: 550 mm · Scope: 705 mm · Wide mudguard profile: 90 mm · Height of mudguard profile: 33 mm · Total height from support surface to top edge: 190 mm · Mounting type: Nuts & bolts · Piaggio spare part no.: 267651
CHF 34.90
CHF 47.90
Collection only possible with online purchase and appointment.
