Professionally machined and spindled to 52 mm ADDY E50 4-bearing racing engine housing with GME (housing-membrane intake) for your Puch moped / moped.
This racing gear is the «der.prüfstand» edition, which is produced exclusively for mofakult. The massive 39.5 x 26 mm intake provides plenty of steam with the diaphragm system provided for this purpose. No modifications to the Puch Maxi frame are required to install the engine.
Details
| Manufacturer | ADDY |
| Material | Aluminum |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Parmakit 47 mm cylinder kit with cylinder head | Puch
Manufacturer: Parmakit · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Nominal diameter: 47 mm · Ø cylinder neck: 51 mm · Ø outlet inside: 27.5 mm · Ø piston pin (B): 12 mm · Inlet window: 30 x 18 · Hole spacing outlet: 46 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Number of fixing points: 4 pcs · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Decompressor: No · Hole spacing inlet: 46 mm
CHF 399.90
Stage6 R/T RT-PWK 28 mm carburetor *Black Edition*
Manufacturer: Stage6 R/T · Area of application: Tuning · Color: black · Surface: varnished · Carburetor type: RT-PWK · Nominal diameter: 28 mm · Mounting type: Flange · Mounting type: Plug connection · Ø Air filter connection: 50 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5
CHF 174.90
Stage6 R/T RT-PWK 24 mm carburetor Stage6 *Black Edition*
Manufacturer: Stage6 R/T · Area of application: Tuning · Color: black · Surface: varnished · Carburetor type: RT-PWK · Nominal diameter: 24 mm · Mounting type: Flange · Mounting type: Plug connection · Ø Air filter connection: 50 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5
CHF 167.90
Not in stock
Moped fans like you also bought:
HK Clutch "Racing" Kickstarter | Puch E50
Ø inside: 13.6 mm · Ø inside: 14.6 mm · Manufacturer: HK Clutches · Area of application: Racing · Material: Steel · Material addition: Aluminum · Number of springs: 3 pcs · Recording type: Cone mounting · Number of jaws: 3 pcs · Ø outside: 93 mm · Thickness: 20.3 mm
CHF 309.90
Stage6 R/T RT-PWK 24 mm carburetor Stage6 *Black Edition*
Manufacturer: Stage6 R/T · Area of application: Tuning · Color: black · Surface: varnished · Carburetor type: RT-PWK · Nominal diameter: 24 mm · Mounting type: Flange · Mounting type: Plug connection · Ø Air filter connection: 50 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5
CHF 167.90
Not in stock
swiing® ingenious crankshaft High End with mounted bearings (Version 2.0) | Puch E50
Manufacturer: swiing® ingenious parts · Area of application: High End · Area of application: Racing · Area of application: Tuning · Material: Aluminum · Cheek type: Full cheeks · Material: Steel · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Thread length: 11 mm · Thread length: 15 mm · Total length of crankpin on clutch side: 74 mm · Weight: 968 g · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø piston pin (B): 12 mm · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 17 mm · Thread type: MF10x1 (fine pitch thread) · Ø Bearing seat (ignition side): 17 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Number of gears: 1 pcs
CHF 178.90
Not in stock
Collection only possible with online purchase and appointment.
