High-quality starter cable (inner cable) suitable for the E50 engines, which were installed on Puch Maxi mopeds.
This starter clutch cable can also be used universally for motorcycles such as Puch, Puch Maxi, Sachs, Hercules, Pony, Solex, Tomos, Zündapp, etc.
Ø Starter wire: 1.5 mm
Cable length: 1.60 m (= 160 cm)
Ø Nipple: 8 mm
Nipple width: 12 mm
A quality product made in Germany.
Details
Ø nipple | 8 mm |
Manufacturer | Made in Germany |
Material | Steel |
Area of application | Standard |
Surface | galvanized (blue) |
Ø Stranded wire | 1.5 mm |
Cable length | 1600 mm |
Number of components | 1 pcs |
Nipple shape | Barrel (transverse) |
Nipple length | 12 mm |
Suitable for the following models
Puch |
Accessories & related products
Motorex Spray Intact 200 ml
Manufacturer: Motorex · Area of application: Chemistry · Area of application: Workshop accessories · Contents [ml]: 200 ml · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous
CHF 14.70
CHF 73.50/l
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Ø outside: 8 mm · Total length: 15 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Width across flats SW: 7 mm · Thread type: M6x1 (standard thread) · Manufacturer: Magura · Thread length: 7 mm · Ø Cable bushing: 2.3 mm · Ø Bundle: 6 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Area of application: Standard
CHF 2.50
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø nipple: 3 mm · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm · Number of components: 1 pcs · Area of application: Standard
CHF 2.80
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Number of components: 1 pcs · Area of application: Standard
CHF 2.40
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Total length: 6 mm · Screw head: Lens head · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
CHF 2.00
Magura cable clamp Ø 7 x 9 mm
Ø outside: 7 mm · Total length: 9 mm · Total length: 14.5 mm · Drive: External hexagon · Drive: Slot · Screw head: Countersunk head · Screw head: Hexagon · Width across flats SW: 6 mm · Thread type: M4x0.7 (standard thread) · Manufacturer: Magura · Thread length: 6 mm · Ø Cable bushing: 2.5 mm · Number of components: 1 pcs · Material: Chrome steel (stainless steel) · Material: Steel · Surface: blank · Surface: galvanized (blue) · Area of application: Standard
CHF 2.50
Brake cable Ø 1.8 mm x 185 cm (nipple ball)
Ø Stranded wire: 1.8 mm · Cable length: 1850 mm · Nipple shape: Ball · Ø nipple: 5.8 mm · Nipple length: 6.3 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
CHF 2.40