Battery-powered rev counter for adjusting the engine of your moped, moped and small motorcycle.
With this marvel of technology, you can precisely measure the speed and test and optimize any changes made. The measurable maximum speed is 16,000 rpm.
The crocodile clip supplied is attached to the ignition cable to show the brute force of your 2-stroke carriage in black and white. Alternatively, the measurement can be carried out either via the supplied cable antenna or at close range by means of telekinesis (inductive) by simply holding the plug connector.
Note: For the measurement of electronic ignitions, the device must be set accordingly. Instructions are included in the scope of delivery.
Other useful tools can be found under accessories.
Quality product from the German manufacturer STIHL.
| Total length | 55 mm |
| Manufacturer | STIHL |
| Material | Plastic |
| Color | white |
| Signal type Tacho | GPS / digital |
| Total height | 15 mm |
| Depth | 35 mm |
Ratings
Accessories & related products
Explore categories from Tools
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 3.94 mm · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm
CHF 12.50
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Manufacturer: Airsal · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 44 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 24 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Hole spacing inlet: 38 mm · Area of application: Tuning
CHF 99.90
Not in stock
Airsal gasket set 44 - 45 mm
Manufacturer: Airsal · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Number of components: 4 pcs · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Hole spacing inlet: 38 mm · Area of application: Tuning
CHF 9.90
Hot
swiing® revival 12 mm carburetor "Original" | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: gray · Width: 50 mm · Carburetor type: SRE · Height: 108 mm · Nominal diameter: 12 mm · Total length: 65 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.15 · Nozzle size: 52 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Area of application: Standard · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0
CHF 69.90
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Area of application: Tuning · Place of use: Exhaust · Ø inside: 27.4 mm · Reinforced: No · Thickness: 3 mm · Ø outlet inside: 28 mm · Hole spacing outlet: 42.5 mm · Ø screw holder: 6.6 mm
CHF 7.40
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
