Rubber bumper for the 1st generation of the original fork on your Piaggio Ciao P moped / moped.
This protective rubber with 8 mm pin was only installed on very early models.
However, the rubber stud is also suitable for later forks where the drill hole has become larger due to corrosion or the rubber stud with 7 mm stud does not stay perfectly in position.
Price per piece. Two pieces are required to overhaul the fork.
You can find other wear parts for your fork in the accessories section.
A quality product made in Italy.
Original Piaggio spare part number: 103699
Alternative to the original Piaggio spare part number: 176373
Details
| Manufacturer | Made in Italy |
| Material | Rubber |
| Color | black |
| Total length | 22 mm |
| Ø mounting hole | 8 mm |
| Width | 16 mm |
| Piaggio OEM number | 103699 |
| Alternative version of the Piaggio OEM number | 176373 |
Suitable for the following models
| Piaggio | Ciao - Ciao |
Accessories & related products
swiing® revival fork spring Ø 24 mm reinforced (pair) Inox | Piaggio Ciao P, SC
Ø wire: 4.25 mm · Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Color: Chrome · Surface: electropolished · Ø outside: 24.75 mm · Ø inside: 16.25 mm · Total length: 100 mm · Piaggio OEM number: 113124
CHF 27.90
swiing® ingenious axle swing arm set | Piaggio Ciao
Manufacturer: swiing® ingenious parts · Material: Brass · Material: Chrome steel (stainless steel) · Color: gold · Ø outside: 16 mm · Ø outside: 22 mm · Total length: 50 mm · Drive: External hexagon · Ø Bearing inside: 12.85 mm · Thread type: M8x1.25 (standard thread) · Thread length: 22 mm
CHF 29.90
Not so nice 
Fork repair kit (galvanized springs) | Piaggio Ciao
Ø wire: 3.8 mm · Material: Plastic · Material: Rubber · Material: Spring steel · Material: Steel · Color: black · Surface: galvanized (blue) · Surface: powder-coated · Color: silver · Ø outside: 27.4 mm · Ø inside: 20 mm · Total length: 99 mm
CHF 39.90
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Reserve level: 70 mm
CHF 9.90
CIF wheel axle set M11x1 x 165 mm front wheel galvanized | Piaggio Ciao, SI, Bravo
Manufacturer: CIF · Ball bearing closed: No · Material: Steel · Surface: galvanized (blue) · Surface: galvanized (yellow) · Width across flats SW: 15 mm · Width across flats SW: 17 mm · Total length: 165 mm · Height: 2 mm · Height: 4 mm · Height: 10 mm · Shank length: 18 mm · Ø shaft: 10.3 mm · Thread type: MF11x1 (fine pitch thread) · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Thread length: 73 mm
CHF 14.90
GPO control bearing set | Piaggio Ciao
Bearing type: Bearing ring · Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Color: silver · Ø outside: 41.4 mm · Ø outside: 42 mm · Ø inside: 27 mm · Ø mounting frame: 30.05 mm · Height: 10.5 mm · Height: 17 mm · Thread type: FG25.4 (1" 24G) · Ø ball [inch] / [mm]: 5/32" (4.00 mm)
CHF 18.90
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Germany · Material: Steel · Color: black · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears
CHF 19.90
Hot 
swiing® ingenious bearing conversion kit cast front wheel | Piaggio Ciao, SI, Bravo, Grillo
Manufacturer: SKF · Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Width: 9 mm · Ø outside: 14.9 mm · Ø outside: 20 mm · Ø outside: 32 mm · Ø inside: 11.25 mm · Ø inside: 15 mm · Total length: 53.5 mm
CHF 29.50
swiing® ingenious axle swing arm set | Piaggio Ciao
Manufacturer: swiing® ingenious parts · Material: Brass · Material: Chrome steel (stainless steel) · Color: gold · Ø outside: 16 mm · Ø outside: 22 mm · Total length: 50 mm · Drive: External hexagon · Ø Bearing inside: 12.85 mm · Thread type: M8x1.25 (standard thread) · Thread length: 22 mm
CHF 29.90
Collection only possible with online purchase and appointment.
